The 6” radiant cooking element with limiter fits under the glass cooktop and supplies heat to the cooking area. If your element is not heating, you can test the element for continuity with a multimete...
$162.93
In Stock
Order within the next 1 hr and 8 mins and your part ships today!
This convection fan blade is designed for use with various makes and models of range and oven and is sold as an individual part. Made of metal and measuring approximately 4.75-inches in diameter, this...
$43.07
In Stock
Order within the next 1 hr and 8 mins and your part ships today!
This genuine OEM oven temperature sensor probe monitors the internal temperature of the oven to ensure accurate and consistent cooking performance. By sending temperature readings to the control syste...
$62.31
In Stock
Order within the next 1 hr and 8 mins and your part ships today!
If your oven isn’t heating properly or the display is blank, the relay control board may need replacing. This part acts as the “brain” of your appliance, controlling temperature, cooking cycles, and t...
$383.71
In Stock
Order within the next 1 hr and 8 mins and your part ships today!
This replacement light bulb provides clear illumination to improve visibility during appliance operation. It is commonly replaced when the original bulb burns out, flickers, or no longer produces adequate light.
$65.83
In Stock
Order within the next 1 hr and 8 mins and your part ships today!
Experiencing issues with your oven light not switching off? We have the solution for you. Our OEM Frigidaire Oven Door Light Switch is a quandary solver. This genuine piece is perfect for specific Fri...
$57.27
In Stock
Order within the next 1 hr and 8 mins and your part ships today!
Order within the next 1 hr and 8 mins and your part ships today!
Questions And Answers for 79042569311
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jared
October 13, 2025
Is a 9 in replacement turbo boil element available for this model?
For model number 79042569311
Hi Jared, thank you for your inquiry. According to our research, the broil element, part number PS12741833, is compatible with your model number. Glad to be of help!
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the different sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!!
Repair was quite easy, as long as you have the instructions for removing the door. The screws that hold the bottom of the door to the fixed hinge are placed into the side of the hinge assembly after removal; this holds the door at a 45 degree angle for easy removal. After that, just place the door on a flat surface and dismantle the door from the inside. The inner glass is contained in a metal frame with another piece of glass; this frame comes apart easily using the clips in each side. The door assembles easily after the glass is replaced; just take your time and give yourself enough room to lay out the parts as you go. Good luck!
Had to reference original owner's manual for instruction(s) on how to remove oven door. Used several "YouTube" videos to reference oven door design (Oven door glass is actually several layers of glass.) After completing about 30 mins of research and finding the right square drive bit, the repair went smoothly and without complications. The biggest challenge was researching and understanding what part(s) were needed and how to replace them. It seemed liked a lot of work doing the research however it sure beat a $350 repair bill. It cost me $90 and about 1 1/2 hours of total time. Oven works better than ever, thanks parts select for the part(s) and diagram(s) ...
