If your stove burner isn’t heating right—stuck on one setting or not turning on at all—this replacement switch could be the fix. It helps control the heat on your cooktop by adjusting the power sent t...
This dual radiant surface element is designed to deliver flexible heating for your electric range or cooktop, accommodating both small and large cookware with its two heat zones measuring 9 inches and...
Is your stove, oven, or range not heating as expected? Whether too hot, too cold, or not turning on at all, we have a fix for you! The Frigidaire Range Surface Element Switch Kit is an original, manuf...
If your cooktop isn’t heating properly, this dual radiant element could be the fix you need. It delivers reliable heat to your cooking surface using a radiant coil beneath the glass, making it perfect...
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Removed the wires that I could, then terminal block. Installing the new terminal block was very easy; however the wires that arced were fused to the terminal bock screws and needed to be cut and new connectors had to be put on the wires to allow them to be reattached to the block safely. Once all was replaced and reinstalled the oven has worked great. The length of the repair was increased because of the melted parts and having to run to the store to get the new wire connectors big enough to fit on the wires. If we were simply replacing the block and had not encountered the melted ends, it would have been a very quick and easy repair.
