Models
>
721893
721893 Kenmore - Overview
Models starting with 721893
Click on the best match to narrow your results.
Exact Part matches for your search term
[Viewing 1 of 1]
Coverplate
This part number matches the current model number 721893
PartSelect #: PS12204378
Manufacturer #: 721893
No Longer Available
Keep searches simple, eg. "belt" or "pump".
Damper
PartSelect #: PS3524148
Manufacturer #: 4900W1A001B
This metal vent damper door closes off the exhaust duct when the fan is not running to stop outside air from entering the microwave unit, and opens when the fan turns on to allow air to vent away from...
$17.96
In Stock
Order within the next 11 hrs and your part ships today!
Air Duct Bracket
PartSelect #: PS3523851
Manufacturer #: 4810W1A151A
This bracket holds the metal or plastic flapper that closes off the exhaust duct when the fan is not running and opens when the fan turns on. If the exhaust fan on your microwave does not appear to be...
$27.09
In Stock
Order within the next 11 hrs and your part ships today!
Turntable Motor Coupler
PartSelect #: PS3522918
Manufacturer #: 4370W1A006B
The turntable motor coupler connects the turntable motor to the tray. If the turntable on your microwave will not rotate, you may have a faulty motor coupler. The coupler commonly has a D shaped openi...
$25.93
In Stock
Order within the next 11 hrs and your part ships today!
Hardware Mounting Kit
PartSelect #: PS3522503
Manufacturer #: 3861W1A043C
$43.71
In Stock
Order within the next 11 hrs and your part ships today!
![SCREW,TAPPING[TRUSS HEAD] – Part Number: 1TTG0402422](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/3517545-1-S-LG-1TTG0402422-SCREW-TAPPING-TRUSS-HEAD.jpg "SCREW,TAPPING[TRUSS HEAD] – Part Number: 1TTG0402422")
Magnetron
PartSelect #: PS3517732
Manufacturer #: 2B71732G
$189.10
In Stock
Order within the next 11 hrs and your part ships today!
Thermostat
PartSelect #: PS3530464
Manufacturer #: 6930W1A003K
$18.42
In Stock
Order within the next 11 hrs and your part ships today!
Common Symptoms of models starting with 721893
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wanted to see the instructions before I install it.
-
Rene from MORENO VALLEY, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The new part was too thick for the worn out plastic ring which is obsolete.
Needed to raise the part to match the ring. I used peanut butter to hold plastic shim while replacing to hold it in place. Built in Oct. 2009.
Parts Used:
-
James from PURCELLVILLE, VA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Shaft socket was worn out
-
Cesar from Miami, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!