6657342990 Kenmore Trash Compactor - Overview
Sections of the 6657342990
[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Washer Front Leveling Foot
PartSelect #: PS11747965
Manufacturer #: WPW10001130
Sold Individually.
$9.44
In Stock
Refrigerator Screw
PartSelect #: PS11747542
Manufacturer #: WP98165
This screw is a little under an inch long and is made of metal. It is used with a refrigerator's ice maker assembly. Sold individually.
$10.57
In Stock
Lid Hinge Mounting Screw
PartSelect #: PS11748588
Manufacturer #: WPW10119828
Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.
$9.85
In Stock
Drawer Roller
PartSelect #: PS11747573
Manufacturer #: WP9871602
Appliance takes 2 - Sold individually.
$19.75
In Stock
Wheel Assembly - Kit of 2
PartSelect #: PS398587
Manufacturer #: 882688
This kit contains 2 wheels.
$34.95
In Stock
Refrigerator Single Hex Head Screw
PartSelect #: PS11742731
Manufacturer #: WP489069
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
$10.51
In Stock
Dryer Screw
PartSelect #: PS11743744
Manufacturer #: WP681414
This screw is sold individually.
$10.51
In Stock
Drive Motor
PartSelect #: PS3652693
Manufacturer #: W10439651
This motor operates the trash compactor press that helps compacts the trash.
$346.74
In Stock
Drawer Slide - Left Side
PartSelect #: PS11747562
Manufacturer #: WP9870975
This drawer track supports the left hand side of the sliding drawer.
$69.25
Special Order
Trash Compactor Nut
PartSelect #: PS11744731
Manufacturer #: WP776356
Sold individually.
$10.51
In Stock
SLIDE TRACK-FRAME,RH,GALV,SERV
PartSelect #: PS17629621
Manufacturer #: W11722978
$98.81
Special Order
Common Symptoms of the 6657342990
[Viewing 2 of 2]Drawer is hard to open and or close
Fixed by
these parts
these parts
Show All
Shaking and Moving
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Trash bin would not roll out completely
-Removed the forward sliding rail screws...lifted the rails up several inches to access the wheel assembly...bent back the steel tab to access the nuts holding the wheels to the frame...replaced the wheels and bent back the steel tabs to original position. Trash bin now rolls out completely as before
Parts Used:
-
Roger from Grantham, NH
-
Difficulty Level:Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Socket set
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Compactor draw was not opening fully as the wheel bearings had seized
I followed the you tube video instructions provided by customer care. This involved pulling the unit free from the cabinet, removing several screws that held the housing in place, this gave access to the wheel assembly, then I removed the nuts that held the wheel assembly in place. Fitting the new wheel assemblies was easy as was replacing the housing screws. After reinserting the draw and pushing the unit back into the cabinet it worked like new
Parts Used:
-
Andrew from ASHEVILLE, NC
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Roller was flat
Bought wrong roller. The drawer roller is different than the stationary rollers. Note the difference.
Parts Used:
-
John from Lancaster, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Wrench set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!