All Installation Instructions for Kenmore Microwave 66563792303

A glass fell out of pantry onto glass tray and broke it.

I called the repair/parts number to make sure I had correct parts and the young lady instructed me as to the size of the serving tray; within 48 hours we had the VERY carefully wrapped carton opened and back in the microwave, working perfectly. Thank you. We'll recommend you to our friends!

Parts Used:

Glass Cooking Tray

Al from Torrance, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

replace light blub

removed grill cover, removed bulb plate, unscrew bulb, screw new bulb in socket,put bulb cover back on and screw grill cover back on. no issues whatsoever.

Parts Used:

Light Bulb - 40W

roger from palm coast, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Glass cooking tray for microwave cracked.

All I had to do was lay the new tray in the microwave. Easy as pie. Also, the new tray arrived very quickly.

Parts Used:

Glass Cooking Tray

Sharon from Kannapolis, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

The glass tray in the microwave got chipped while i was washing it and started to crack.

I just opened the box and set it in. Took all of two minutes.

Parts Used:

Glass Cooking Tray

Amber from Loretto, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

glass cooking tray droped and broken

just replace need cooking tray

Parts Used:

Glass Cooking Tray

janice from dunn, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Light Burned Out

Followed the instruction booklet that came with the microwave. Very easy.

Parts Used:

Surface Light Bulb

Patti from Coarsegold, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

burnt out light bulb

The problem I have with changing the bulb is my microwave is an overhead one and therefore I cannot tip it on its side to easily replace the bulb. I have to drop the lid down and carefully install the new bulb from underneath.

Parts Used:

Light Bulb - 40W

Shirley from Londonderry, NH
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Light burned

Unscrewed the lens cover anbd inserted the new bulb. Put the cover back on and there was light!

Parts Used:

Surface Light Bulb

Jennifer from Red Oak, IA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

2 burned out bulbs under the microwave/important light source for kitchen stove.

I didn't do the repair -- my husband did, said it was easy, had no problems what so ever! The new bulbs give a lot more light to the cooking area.

Parts Used:

Light Bulb - 40W

Ferol from San Antonio, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

left something in microwave too long and burned parts

replaced burnt parts

Parts Used:

Drive Coupling

Microwave Turn Ring

Glass Cooking Tray

Norman from Angier, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Broken plate

Took the replacement plate out of the box and put it in the microwave in seconds. I never realized how much of a difference having the correct microwave plate would make. It's great to have it back.

Parts Used:

Glass Cooking Tray

JASON from ABSECON, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Microwave turntable stopped rotating.

1. Unplug the power cord from the wall socket. 2. Remove the 10 screws holding the bottom cabinet cover in place. The bottom cabinet cover will swing down allowing acces to the inside ofe the microwave. 3. Remove the connector from the turntable motor. 4. Use a T15 Torx driver to remove the 2 Torx screws holding the motor in place. 5. Remove the motor. 6. Reverse the process using the new motor.

Parts Used: