This part is the replacement door seal for your dishwasher. It is approximately 22 inches long and 2 inches wide. This door seal is made of gray plastic and is found at the bottom the dishwasher. The ...
$15.95
In Stock
Order within the next 6 hrs and your part ships today!
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
$80.99
In Stock
Order within the next 6 hrs and your part ships today!
This door latch is designed to secure the dishwasher door and signal the control board when the door is properly closed. If your dishwasher won’t latch or start, the latch may be faulty and should be ...
$46.38
In Stock
Order within the next 6 hrs and your part ships today!
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
$11.80
In Stock
Order within the next 6 hrs and your part ships today!
This part has a swivel gooseneck fitting and that allows it to be installed closer to the wall. This part has a 3/4" hose thread on one side and a 3/8" copper tubing on the other side.
$28.52
In Stock
Order within the next 6 hrs and your part ships today!
This fill hose is a genuine OEM replacement part for your dishwasher. The hose is made of black plastic, and is accordion-style, for ease of movement within your dishwasher. To replace the fill hose, ...
$97.94
In Stock
Order within the next 6 hrs and your part ships today!
Order within the next 6 hrs and your part ships today!
Questions And Answers for 66512773K311
Ask our experts a question about this model and we'll get back to you as soon as possible!
13 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
December 3, 2022
Upper rack front attachment parts that hold the upper dish rack to the rolling arms , (left and right) extending arms have broken. So no support for the upper rack on the front clips.
Plastic roller parts to attach the upper rack for the front support.
Need 2 complete sets for the left and right side front.
For model number 66512773K311
Hello Joe, thank you for your question. There is a kit that has all the necessary parts for both sides. The kit is part PS10064063. We have an installation video for you to access to see if this is a repair for you. We look forward to hearing from you soon.
Hello Gregory, thank you for your question. We have researched the model you have provided and have found that the lower dishrack, part number PS10057160, will fit your model. Please watch the attached video for installation instructions. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Hi Tom, thank you for the question. Based on our research, your model comes with 2 types of door seals. The door seal is part number PS12348515, and the lower door seal is part number PS11755651. We hope that helps!
Right hand corner leaks sometimes 2 or 3 ounces Does not leak all the time.
For model number 66512773K311
Hello Tom, thank you for getting in touch. Based on our understanding of the issue, we would suggest checking the gasket, part number PS11746142, to solve the problem. Glad to be of assistance!
Over heating on dry. High limit thermostat is bad. Do you have this part? If so , I would like to buy it.
Thanks. Randy
For model number 66512773K311
Hi Randy, Thank you for writing. The Thermostat for this model is listed as PartSelect Number PS11750035. Thank you for the inquiry, good luck with the repair!
First, I replaced the bottom door seal. You will need magnetic nut drivers because of the location of the 3/16 screws that hold the seal in place. you also need a 1/4 in nut driver to remove plastic cover that covers up the 5 3/16 screws. Last you need a small star driver to remove the door screws. Note 4 of the door screws, the 4 on top of the door are much longer than the side screws. With all this said, this seal was not my problem. I then replaced the large black rubber seal around the tub. Be sure if you do this you fold the seal in half and start in the middle of the top of the opening so you have the exact amount of seal left over on both sides. Also when you remove the old seal, clean the area it was removed from with a damp cloth. Turns out, That was not my problem either. So now I will move to the next step to see where the water is coming from but maybe this information will help someone with a simple door leak.
I watched the instructional videos that showed how to replace the inlet fill hose/water inlet a couple of times. The repair was exactly as shown. No trouble at all.
Following a utube video made it easy. Removed the outer cover of the door to expose latch. Two screws remove the latch, pay attention to how it was positioned and put the new one on and then replace the panel. But first turn off the electricity to the unit at the fuse box.
