Models
>
647626
647626 Kenmore Range - Overview
Models starting with 647626
Click on the best match to narrow your results.
- 6476267410 Kenmore Range
- 6476267411 Kenmore Range
- 6476267412 Kenmore Range
- 6476267416 Kenmore Range
- 6476267417 Kenmore Range
- 6476267420 Kenmore Range
- 6476267421 Kenmore Range
- 6476267422 Kenmore Range
- 6476267426 Kenmore Range
- 6476267427 Kenmore Range
- 6476267440 Kenmore Range
- 6476267441 Kenmore Range
- 6476267442 Kenmore Range
- 6476267446 Kenmore Range
- 6476267447 Kenmore Range
- 6476267460 Kenmore Range
- 6476267461 Kenmore Range
- 6476267462 Kenmore Range
- 6476267466 Kenmore Range
- 6476267467 Kenmore Range
- 6476267510 Kenmore Range
- 6476267520 Kenmore Range
- 6476267540 Kenmore Range
- 6476267560 Kenmore Range
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W
PartSelect #: PS217532
Manufacturer #: 40A15
This 40-Watt light bulb is sold individually and is a genuine OEM replacement option for your home appliances. It is specially designed to withstand extreme temperatures, so this bulb is compatible wi...
$5.85
Special Order
Drip Bowl - 8 Inch
PartSelect #: PS244696
Manufacturer #: WB32X106
Sold individually. This part is located beneath the element and catches any spills.
$65.96
Special Order
Drip Bowl - 6 Inch
PartSelect #: PS244697
Manufacturer #: WB32X107
This six inch chrome drip bowl is intended for use with rolled terminal style plug in surface element units.
$11.19
Special Order
Surface Burner Terminal Block Kit
PartSelect #: PS232606
Manufacturer #: WB17X210
This kit comes with the terminal block, mounting clip and wires.
$91.36
Special Order
Control Thermostat
PartSelect #: PS235871
Manufacturer #: WB21X505
This part establishes and maintains the internal temperature of the oven cavity.
No Longer Available
Rear Drawer Glide
PartSelect #: PS243417
Manufacturer #: WB2X9146
Also called Rear Block.
No Longer Available
Drawer Glide Block
PartSelect #: PS243419
Manufacturer #: WB2X9148
This part attaches to the drawer support to help guide the bottom drawer.
No Longer Available
Common Symptoms of models starting with 647626
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
There was no heat on the coils.
I opened the lid, and found that the terminal blocks were burnt, the wires were melted. I ordered one set of terminal block to replace the burnt one, and it worked. Before I started, I shut off the electricity in the whole house to be safe.
Parts Used:
-
Shaohui from East Lansing, MI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
48 of 52 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Surface burner coil did not work.
TURN OFF ALL POWER TO KITCHEN. Took off all burner coils and plates below them. Lift hood. Locate part. Remove old part and replace with new part in same way as was previously installed. The wire that comes with the kit is actually too much wire, but just arrange it the best you can and leave it....no big deal. I didn't have a magnet, but needed one. The wire from burner coil to switch runs through a harness which is screwed on to the body of the oven (below the range). Be careful NOT to drop it behind oven when taking it out. I dropped it and took forever to get it. That turned a 20 minuate job into an hour and a half. Otherwise this is an easy job that anyone can do. Refrigerator compressor is next. Have fun.
Parts Used:
-
Gregory from Mont Belvieu, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Socket set
23 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Interior light needed replaced
Unplugged the appliance for safety. Removed two 1/4" screws that held the assembly in place. Carefully removed the wire guard that retains the glass shield. Unscrewed old light bulb and replaced with new part. Reversed the steps after cleaning glass cover.
Parts Used:
-
Leo from TWIN FALLS, ID
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
15 of 25 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!