633134X54A (2002) Briggs and Stratton Snow Blower - Overview

Sections of the 633134X54A

[Viewing 12 of 12]

Parts for the 633134X54A

[Viewing 12 of 217]

Engine Key Set

PartSelect #: PS9137874

Manufacturer #: 794696

Lower Drive Cable (12'')

PartSelect #: PS9894291

Manufacturer #: 1501122MA

This lower front drive cable is designed to engage and disengage the traction system on two-stage snowblowers, allowing smooth, reliable forward and reverse movement. Built with a durable steel inner ...

$15.95

Spacer-Fuel Tank

PartSelect #: PS9090189

Manufacturer #: 710247

Grommet

PartSelect #: PS12634704

Manufacturer #: 148MA

Grommet eye bolt .40

Hair Pin

PartSelect #: PS9894334

Manufacturer #: 1501293MA

Plug christmas tree.3

PartSelect #: PS12665483

Manufacturer #: 760040MA

Kit accm upgrade

PartSelect #: PS12670215

Manufacturer #: 71015

Pulley

PartSelect #: PS12632892

Manufacturer #: 1501115MA

This is an authentic manufacturer-sourced component from the Murray manufacturer. The friction pulley is constructed of durable metal, and is made for use with many snowthrower machines. The friction ...

Roller Bushing

PartSelect #: PS12624285

Manufacturer #: 1501138MA

This is an OEM part sourced directly from the manufacturer. The wheel bushing is designed for use in snow throwers from Murray, Snapper, and Simplicity. This part is made of high-quality plastic, an...

Wire-Stop

PartSelect #: PS9090052

Manufacturer #: 710097

Assy upper chute c

PartSelect #: PS12677922

Manufacturer #: 761168E717

Nut

PartSelect #: PS12619843

Manufacturer #: 1101253MA

Idler supt assy 22sd

Common Symptoms of the 633134X54A

[Viewing 3 of 3]

Drive system does not work

Installation Instructions of parts on the 633134X54A

[Viewing 1 of 1]

Refurbishing for next winter season

I replaced the auger belt and drive belt by separating the machine. The auger belt alone can be replaced by simply tilting without separating but the drive belt can not. So after separating the machine, I removed the auger belt by loosening the belt guide and removing the tensioner. I then loosened the nut that secures the drive wheel. This gave me enough play to remove the drive belt from the drive tensioner and then wiggle it from the drive wheel and out of the machine. Install by wiggling the belt back behind the drive wheel until you can slip it on the wheel. pull tensioner pulley out of the way to get the belt on the top pulley. Tighten the nut to secure the drive wheel. Reconnect the machine at the bottom of the auger housing and replace the auger belt, tensioner, and belt guide. Complete by replacing the upper bolts that hold the two parts together. I have not replaced the friction wheel as of yet. My process took 30 - 45 minutes for both belts.

Parts Used: