This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
Sold individually. This is a radiant surface element with a limiter, and it works in conjunction with your range. The function of this part is to give heat to the surface directly above it, on cooking area stovetop.
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
December 18, 2019
I have a Kenmore elite double oven. I would like to know if the baking element in any of the following elements will fit my model.....2600, 2601, 2606 come up on your site
For model number 62960002606
Hello Brian and thanks for writing.
Yes, it will fit those models as well as it is the same element Part Number: PS11744518 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
I know this model number doesn't exist on your list for some reason, but that's the model # on the flip up metal tag. It's a Kenmore Elite double oven. The front left double burner/element's outer ring no longer works. That is the part I'm searching for. The oven's Serial # is : 14706758LR
On the bottom of the element : (very faded)
ceramaspeed 09-17-07 MX
R0HS 230T8L759R 16:10
7406P386-60 2400 1100 W24
For model number 62960002606
Hello Craig, thank you for your question. The Front Left Element is PS11764922. It is sold as a single unit. We hope this helps.
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. The oven works fine! Note that due to thermal lag the temperature overshoots to 370 degrees and undershoots to 340 degrees, this appears to be normal oven operation. Putting door back in place was easy.
Turned the breaker off, I removed 2 screws securing the range top to the range, opened the top and secured it in the up position, Removed the 2 screws securing the element ,one at a time I swapped the quick connectors from the old element to the new and repeated the process in reverse. I save over $100.00 in labor, plus most companies get you for a trip charge. It was easy!!
Thermal switch is integral to element and can not be changed, must replace entire element.
Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numerical position and then moved wiring to new element. Slide new element under bracket and reinstalled single screw. Replaced top and screwed down. Turn on power and test .
