This crisper drawer cover support is for refrigerators.
Crisper drawer cover support supports the crisper drawer lid.
Wear work gloves to protect your hands when installing this part.
Sold individually. This crisper drawer is for refrigerators.
Crisper drawer stores fruits and vegetables at a humidity level that helps keep them fresh longer.
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This board will need to be programmed upon installation. The electronic control board is used in refrigerators to monitor and manage the temperature settings, such as cooling or defrosting times. If y...
Glass NOT included. This is the frame only.
This crisper drawer cover frame is for refrigerators.
Crisper drawer cover frame supports the crisper drawer and holds the shelf that covers the crisp...
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lisa
February 13, 2020
Water does not fill into arm ejector/striper. Water flows over, into ice tray, freezing ice into a solid blob. Have defrosted several times. Even used a hair dryer. Result was temporary for two cycles. Recommend a longer defrost time??
For model number 59679313510
Good Day Lisa. Thank you for your question in regards to your unit (Model Number 59679313510). Based on our research, the Water Inlet Valve (PartSelect Number PS11755667) on your unit may have become faulty and needs to be replaced. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
Can i pop the front cover off without damaging anything? Would like to replace the water inlet valve myself. (if possible). So disappointed with this product. Purchased in 2017, and this is already the second repair needed.
For model number 59679313510
Hi Lisa. There should be retaining tabs you will have to depress with a flat head screw driver, once these tabs are depressed the front cover should come off easily. Thank you for your question and good luck with your repair.
I need the glass only (it broke) for the shelf part# ps12731291. I didn't see it offered in this information
For model number 59679313510
Hello Nancy, thank you for your question. The Shelf PS12731291 is only offered as it shows on the website, as a complete assembly of the frame and glass. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Keith
April 4, 2023
Where is the filter located and how do I change it?
For model number 59679313510
Hi Keith, thank you for reaching out. According to our research, the UV filter drier is located near the compressor of the refrigerator on the backside. It is connected to the tube and wire on the backside. To change it, first cut the old filter from both ends. Take a new filter and make a little hole on the side according to the size of the tube and wire and solder both ends. Your filter will be changed. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Having seen this problem before in other equipment so I had an idea where to look. Problem: the automatic defrost function was not operating. Looking through openings in the back panel of the freezer compartment, you could see the evaporator coils and fins were a solid chuck of ice. There are three logical components to check. Heater element, thermostat (located just above the evaporator) and a relay on the control board (located in the fridge control panel). Checked the heater with an ohm meter -- OK. The thermostat closes the circuit at around 20 degrees and opens at around 32 degrees. Pulled out the thermostat, wiring, fan unit. Everything unplugs, unscrews, and unclips, don't cut wires. Put the whole assembly in a friends freezer for an hour or so to see if the thermostat closes -- OK. Problem had to be with the control board. Replaced control board, reprogrammed it per included instruction. Everything is working again.
The hard part for me was figuring out which part was causing the problem. I read what others had done and followed their test methods. I checked the defroster heater for continuity and the defroster thermostat to make sure it was closing. the defroster termostat has to be cold to check it. You will need to check it while it is in ice or take it out and put it in another freezer for 30 mins and then check it for continuity. Those items checked out ok so it had to be the control board. The control board is a 5 min job to replace but making sure that is your problem is the hard part. I think the control board was bad due to a power surge we had when the power went out and came back on. It might be a good idea to put a surge protector on your home to protect your fridge and all your other electronic stuff. Our refrigerator is now working like new again. Thank you for all your help, Jim
