592-29222 (0001) Samsung Washer - Overview
Sections of the 592-29222
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Common Symptoms of the 592-29222
[Viewing 5 of 5]Will not drain
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Draining Issues
Fixed by
these parts
these parts
Show All
Water Filling Issues
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Washer stopping in the rinse and spin cycle
Tipped the washer up on a couple of chairs. Pulled the motor apart in three pieces and replaced the Hall Sensor. Error code lead me right to the problem and solution.
Parts Used:
-
Gary from CENTER HARBOR, NH
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
5 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top Load washer would not drain to complete spin cycle.
Though I could hear and feel the drain pump running, the washer would not drain. This model does not have a filter for the drain pump. I lowered the discharge hose from the stand up pipe on the wall, and lowered it to the floor. Water ran right out, so no blockage in the drain system. After removing the inlet and outlet hoses to the pump, a quick inspection showed the impeller on the motor was off the shaft and flopping around. Bingo, motor runs but cant pump.
Ordered from Partselect and received in ONE DAY. I really didn't want to go back to it that soon, but they certainly did their part. Ha. Thank you all. Greg
Ordered from Partselect and received in ONE DAY. I really didn't want to go back to it that soon, but they certainly did their part. Ha. Thank you all. Greg
Parts Used:
-
Greg from Medina, OH
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
10 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer will not drain
Went to YouTube video and followed instructions.
Hardest part was making sure water from hose does not flood floor while taking it off from water pump and letting water drain in bucket.
See YouTube video
https://youtu.be/oOnxbj-unfc?si=OFFwOcNiIymh_9b-
Hardest part was making sure water from hose does not flood floor while taking it off from water pump and letting water drain in bucket.
See YouTube video
https://youtu.be/oOnxbj-unfc?si=OFFwOcNiIymh_9b-
Parts Used:
-
Alpha from JACKSONVILLE, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers
6 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!