58074121300 Kenmore Air Conditioner - Overview
Sections of the 58074121300
[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Room Air Conditioner Installation Kit
PartSelect #: PS7784777
Manufacturer #: 3127A20074Y
The installation kit contains the hardware you need to install the room air conditioner.
$110.03
Special Order
Clamp,Spring
PartSelect #: PS3522762
Manufacturer #: 3H02932B
The fan blade clamp, also known as a clamp spring, are for air conditioners. The clamp supports the fan blade on the motor shaft. When the motor is running, it signals the shaft to turn and rotate, bu...
$10.29
Special Order
Room Air Conditioner Fan Bracket
PartSelect #: PS3524525
Manufacturer #: 4960A20005A
$47.57
Special Order
Questions And Answers for 58074121300
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken fan axial blade
Unscrewed the unit from the exterior case pulled out the unit unscrewed the 4 screw that hold the fan shroud carefully unscrewed the coil pulled back unclipped the axial fan clip gentlyhit with rubber mallet replacement of new fan replaced clip
15 minutes best investment of 20 bucks as apposed to 400 $
15 minutes best investment of 20 bucks as apposed to 400 $
Parts Used:
-
John from HARLINGEN, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
8 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Kenmore Air Conditioner Remote Broken
No repair. Just a new remote controller assembly and it works fine.
Parts Used:
-
Patricia from UPPR CHICHSTR, PA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor mount broke due to imbalance caused by mud dobber nests.
Pulled PTAC out of wall sleeve, unhook wire harness from control area, remove condenser shroud and motor and fan blade all at the same time. Replaced motor bracket and re-installed in reverse order.
Parts Used:
-
Travis from LOUISVILLE, IL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!