56-8492-10-01 Tappan Microwave - Overview

Sections of the 56-8492-10-01

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
White Touch up Paint – Part Number: 5303321319
White Touch up Paint
★★★★★
★★★★★
(1)
PartSelect #: PS467298
Manufacturer #: 5303321319
This 18 ml bottle of white appliance touch up paint is a little over two inches tall. It can be used for refrigerators, microwaves, ranges, clothes dryers, and freezers.
$29.95
  In Stock
SCREW – Part Number: 5303300265
SCREW
PartSelect #: PS463003
Manufacturer #: 5303300265
$32.01
  Special Order
NUT – Part Number: 5303212803
NUT
PartSelect #: PS457503
Manufacturer #: 5303212803
Sold individually.
  No Longer Available
Drain Hose Clamp – Part Number: 216273000
Drain Hose Clamp
PartSelect #: PS425385
Manufacturer #: 216273000
$40.03
  Special Order
Interlock Switch – Part Number: 5303203636
Interlock Switch
PartSelect #: PS454567
Manufacturer #: 5303203636
This part is used to stop the flow of electrical current when the door is opened to prevent any microwave energy escaping.
  No Longer Available
CLIP – Part Number: 3203010
CLIP
PartSelect #: PS446049
Manufacturer #: 3203010
$30.95
  Special Order
Carousel Glass Cooking Tray – Part Number: 5308037674
Carousel Glass Cooking Tray
PartSelect #: PS474509
Manufacturer #: 5308037674
  No Longer Available
SWITCH-MONITOR – Part Number: 5303201602
SWITCH-MONITOR
PartSelect #: PS454335
Manufacturer #: 5303201602
$144.54
  Special Order
MAGNETRON – Part Number: 396112000
MAGNETRON
PartSelect #: PS449465
Manufacturer #: 396112000
  No Longer Available
CORD-ELECTRIC POWER – Part Number: 317005401
CORD-ELECTRIC POWER
PartSelect #: PS440407
Manufacturer #: 317005401
  No Longer Available
FASTENER – Part Number: 08067961
FASTENER
PartSelect #: PS415774
Manufacturer #: 08067961
$8.95
  Special Order
RIVET – Part Number: 5303271581
RIVET
PartSelect #: PS458357
Manufacturer #: 5303271581
  No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Turntable motor was worn out - gears were slipping
The job was very simple, remove the bottom plate of the microwave which is four screws and it exposes the motor. There are two screws which hold the motor in place that you access from inside the unit. Remove the two screws being carefull not to lose the gasket that is in between the motor and the bottom of the unit. Set the new motor in place being sure to add the gasket to the new part and run the two screws to the new motor and tighten! It don't get any easier than that! Also do not forget to plug the motor back into the female socket before attaching the bottom plate!
Parts Used:
MOTOR-TURNTABLE
  • Chad from Roanoke, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!