41781100003 Kenmore Dryer - Overview
Sections of the 41781100003
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Belt
PartSelect #: PS2349294
Manufacturer #: 134719300
If your dryer drum has stopped spinning and your clothes are coming out damp, it might be time to replace the belt. This essential part helps the drum rotate, allowing warm air to circulate and dry yo...
$84.00
In Stock
Order within the next 5 hrs and your part ships today!
Dryer Heater Element
PartSelect #: PS2349309
Manufacturer #: 134792700
This 3-coil 5500 watts heating element with housing is used to produce heat to dry the clothes in your dryer. The heating element is strung with a coiled wired. The wire receives, but resists a contro...
$346.83
In Stock
Order within the next 5 hrs and your part ships today!
High Limit Thermostat
PartSelect #: PS446428
Manufacturer #: 3204267
This high limit thermostat has a limit of 260 degrees Fahrenheit. Meaning that it will cut out when the internal dryer temperature reaches 260. This thermostat cuts back in when the temperature drops ...
$68.15
In Stock
Order within the next 5 hrs and your part ships today!
Adjustable Leveling Foot - Black
PartSelect #: PS425733
Manufacturer #: 216396900
Sold Individually.
$41.81
In Stock
Order within the next 5 hrs and your part ships today!
High Temperature Adhesive
PartSelect #: PS474458
Manufacturer #: 5308027429
Used for installing felt and rubber seals on dryers.
$72.65
In Stock
Order within the next 5 hrs and your part ships today!
Thermal Fuse
PartSelect #: PS2349395
Manufacturer #: 137032600
Need a way to keep your dryer safe and protected from overheating? Then the Frigidaire Thermal Limiter is your perfect go-to solution. This genuine part acts as a guard, automatically shutting off you...
$41.75
In Stock
Order within the next 5 hrs and your part ships today!
Moisture Sensor
PartSelect #: PS2349303
Manufacturer #: 134786100
This moisture sensor assembly ensures your dryer delivers optimal performance by detecting the moisture level in each load. By accurately measuring dampness, it allows the appliance to adjust cycle ti...
$103.81
In Stock
Order within the next 5 hrs and your part ships today!
Thermal Fuse
PartSelect #: PS4704883
Manufacturer #: 134711401
This dryer thermal fuse is a critical safety component designed to protect the appliance from overheating. It automatically shuts off power to the motor or heating system if excessive temperatures are...
$44.34
In Stock
Order within the next 5 hrs and your part ships today!
SCREW
PartSelect #: PS417085
Manufacturer #: 131168200
Sold individually.
$29.95
In Stock
Order within the next 5 hrs and your part ships today!
Dryer Drum Roller Kit
PartSelect #: PS12746506
Manufacturer #: 5304523155
INCLUDES 5304523151 SHAFT, 5304523152 ROLLER, 5304523153 NUT, 5304523154 SPACER.
$114.31
In Stock
Order within the next 5 hrs and your part ships today!
Dryer Lint Filter Assembly
PartSelect #: PS8770145
Manufacturer #: 137623900
This is a genuine OEM lint filter, which works with dryers.
$186.17
In Stock
Order within the next 5 hrs and your part ships today!
Idler Arm Assembly
PartSelect #: PS16227173
Manufacturer #: 134793511
This is an authentic idler pulley, which works with dryers.
$59.37
In Stock
Order within the next 5 hrs and your part ships today!
Common Symptoms of the 41781100003
[Viewing 7 of 7]Noisy
Fixed by
these parts
these parts
Show All
Not Heating
Fixed by
these parts
these parts
Show All
Drum Not Spinning
Fixed by
these parts
these parts
Show All
Too hot
Fixed by
these parts
these parts
Show All
Marks left on clothes
Fixed by
these parts
these parts
Show All
Won’t Start
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer wasn't heating properly, drying took too long.
Removed back of dryer with electric nut driver. Lots of screws. Removed old heating element to better access wires and thermostats. Removed baffle at end and transferred to new heater element. Transferred thermostats to new element, reconnected wiring in correct order. Installed new heater element in correct position using tab to locate. Replaced back of dryer. Reconnected dryer vent. Toughest part was squeezing out of space after reconnecting dryer vent. Unfortunately, too short for my weight.
Parts Used:
-
Steven from MARIETTA, GA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
24 of 28 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Internal vent inside the drum was coated in black (plastics from use)
1. Loosened the 3 screws inside of the drum
2. Removed the entire back of the dryer (lots of screws)
3. Removed the old vent (there are 2 screws at the bottom that hold it in)
4. Install new vent (put the screws back in)
5. Close up back and proceed to put all of the screws back
2. Removed the entire back of the dryer (lots of screws)
3. Removed the old vent (there are 2 screws at the bottom that hold it in)
4. Install new vent (put the screws back in)
5. Close up back and proceed to put all of the screws back
Parts Used:
-
Rich from New Albany, OH
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
11 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The clip broke off our sensor making it disconnect, thus we had in inoperable 'new' machine.
By undoing the single screw which holds the sensor in place, the old one falls off. To replace: simply pop the two wires on their connections (small metal studs on the back), slide clip/wire end of sensor in place and replace the screw. You are back in business! Very simple repair that a DIY can save a ton!
Parts Used:
-
Stacey from TWO RIVERS, WI
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
10 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!