Models > 36211XBMBRWW

36211XBMBRWW General Electric Refrigerator - Overview

Sections of the 36211XBMBRWW

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
EVAPORATOR FAN MOTOR – Part Number: WR60X31522
EVAPORATOR FAN MOTOR
★★★★★
★★★★★
(16)
PartSelect #: PS12741350
Manufacturer #: WR60X31522
This evaporator fan motor is located in the back of the freezer and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.   No Longer Available
Evaporator Fan Grommet - Red – Part Number: WR02X12008
Evaporator Fan Grommet - Red
★★★★★
★★★★★
(4)
PartSelect #: PS963756
Manufacturer #: WR02X12008
This evaporator fan grommet is red in color, and is about 1 inch in diameter.
$11.96
  Special Order
Evaporator/Condensor Fan Grommet – Part Number: WR02X10098
Evaporator/Condensor Fan Grommet
★★★★★
★★★★★
(2)
PartSelect #: PS284555
Manufacturer #: WR02X10098
This evaporator fan motor grommet, or condenser fan grommet is built for refrigerators. It provides a cushion between the fan motor and the motor mounting bracket. It is made or round, black plastic a...
$10.40
  Special Order
Light Switch – Part Number: WR23X10725
Light Switch
★★★★★
★★★★★
(6)
PartSelect #: PS8758429
Manufacturer #: WR23X10725
$17.08
  Special Order
Light Bulb - 40W – Part Number: 40A15
Light Bulb - 40W
★★★★★
★★★★★
(2)
PartSelect #: PS217532
Manufacturer #: 40A15
$5.52
  Special Order
Door Shelf Retainer Bar End Cap - Left or Right Side – Part Number: WR2X8345
Door Shelf Retainer Bar End Cap - Left or Right Side
PartSelect #: PS298977
Manufacturer #: WR2X8345
This end cap is sold individually. It can be used for the right or left side of either the freezer or refrigerator door shelves.
$37.05
  Special Order
Condenser Fan Motor – Part Number: WR60X10168
Condenser Fan Motor
★★★★★
★★★★★
(4)
PartSelect #: PS967022
Manufacturer #: WR60X10168
This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.
$66.60
  Special Order
Evaporator Fan Blade – Part Number: WR60X10204
Evaporator Fan Blade
★★★★★
★★★★★
(2)
PartSelect #: PS1018129
Manufacturer #: WR60X10204
This blade attaches to the evaporator motor.
$21.25
  Special Order
Condenser Fans Blade Assembly – Part Number: WR60X10207
Condenser Fans Blade Assembly
PartSelect #: PS1022410
Manufacturer #: WR60X10207
The condenser fan blade assembly helps to regulate the temperature in your refrigerator or freezer. This fan assembly has 4 blades, but other fans may have 3 blades, so be sure to check the number of ...
$23.29
  Special Order
Door Shelf Retainer Bar End Cap – Part Number: WR2X9162
Door Shelf Retainer Bar End Cap
★★★★★
★★★★★
(1)
PartSelect #: PS299579
Manufacturer #: WR2X9162
This is a replacement shelf bar end cap. The end cap connects to the shelf bar on either side, and then snaps into position on the freezer door. This will allow you to store items in the freezer door....
$27.28
  Special Order
Lower Crisper Drawer - Clear – Part Number: WR32X10340
Lower Crisper Drawer - Clear
★★★★★
★★★★★
(1)
PartSelect #: PS652085
Manufacturer #: WR32X10340
This is a replacement crisper drawer for your refrigerator. The drawer is approximately 17 inches long, 13 inches wide, and 9 inches tall. It is made of clear plastic and is sold individually. The cri...
$130.44
  Special Order
Lid Bumper – Part Number: WR02X10540
Lid Bumper
PartSelect #: PS284979
Manufacturer #: WR02X10540
The lid bumper or evaporator fan motor bumper in your refrigerator prevents the fan motor from scraping against the side bracket. If your refrigerator/freezer is noisy, the bumper could be worn down o...
$10.40
  Special Order

Questions And Answers for 36211XBMBRWW

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 36211XBMBRWW

[Viewing 16 of 16]
Noisy
Fixed by
these parts
Show All
Light not working
Fixed by
these parts
Show All
Fridge too warm
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Freezer section too warm
Fixed by
these parts
Show All
Door won’t open or close
Fixed by
these parts
Show All
Fridge too cold
Fixed by
these parts
Show All
Freezer not defrosting
Fixed by
these parts
Show All
Clicking sound
Fixed by
these parts
Show All
Fridge and Freezer are too warm
Fixed by
these parts
Show All
Fridge runs too long
Fixed by
these parts
Show All
Leaking
Fixed by
these parts
Show All
Door Sweating
Fixed by
these parts
Show All
Too warm
Fixed by
these parts
Show All
Won’t start
Fixed by
these parts
Show All
Frost buildup
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Freezer Fan
I removed two srews from the back panel inside fthe reezer compartment and the two that hold the air manifold/baffle? and pulled the baffle out. Then, I removed the two srews that hold the front part of the fan bracket behind the baffle and the back panel came out easily. Two more screws and one quick connect plug attached to the fan and I was done with removal. Insallation was even quicker, I slid the original fan right off the old motor and slid it on the new motor's shaft. Piece of cake! Thanks Partselect.
Parts Used:
EVAPORATOR FAN MOTOR
  • Luis from College Station, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
244 of 261 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
evaporator fan making lots of noise
the repair was really easy!!! took longer to put the little clip on the fan part than it was to install the whole moter and put everthing back together

save money do it yourself.....
Parts Used:
Evaporator Fan Blade EVAPORATOR FAN MOTOR Evaporator Fan Grommet - Red
  • alex from rohnert park, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench (Adjustable)
114 of 130 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Sticking Light Switch
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the switch could be pulled out further each time the catch clip was depressed to the next detent. Then I used the screw driver on the left site to encourage the switch past the detents on the left and very quickly the switch was out of the mount. The wires from the refrigerator pulled out with the old switch. I unplugged the old switch from the wires and plugged in the new switch and shoved the new switch back into the mount, wiggled it a couple of times to make sure it was secure and the job was done. Once I applied the vise gripes at first, the whole job took less than a minute.
Parts Used:
Light Switch
  • Jonathan from Lilburn, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
108 of 126 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!