31FA-7-02 Magic Chef Range - Instructions

George from Plainville, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

12 of 14 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Purchased home but stove had no broiler pan.

Purchased 2 piece broiler pan from this site

Parts Used:

2 Piece Broiler Pan

Raymond from BLOOMINGTON, MN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

16 of 31 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

the burner knobs broke off

I put the 2 burner knobs on and now I have 4 working burners....Thanks for the quick delivery....

Parts Used:

Belinda from Downey, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 17 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Had To Change The Knob I Could Not Read It

Pulled the old knob off and put the new one on. Only thing that was difficult was making sure the knob was the right one because the instructions kept leading me back to a different brand of appliance but since the photo looked alike I went ahead and got it.

Parts Used:

ANDREA from CORNING, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

8 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

30 year old gas stove needed a new burner assembly.

We lifted up the stove top, slipped the burner assembly in. It fit! who knew that we could get a part to an old stove without the model number, just by looking at a picture of the part! Terrific!

Parts Used:

Caroline from South Windsor, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Original Knobs broken; would not work

Removed the aftermarket knobs I originally bought (they would slip or not turn at all) and installed the new Magic Chef knobs on stove. They work perfect! No problems, easy to install and work every time. Thank you so much for your quick shipment. It is now fun again to be cooking, and not worrying about whether the knobs will turn or not. Thank you, thank you

Parts Used:

Lorraine from Prosperity, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

6 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Gas manifold had holes in it.

Removed locking wire from bottom burner assembly then I pulled the element out and replaced with the new one.

Parts Used:

Mr. J.C. from Haines City, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Numbers on thermostat knob were worn off

I was tired of guessing the temperature on the oven in my apartment so I decided to look on-line to see if I could find a replacement. I couldn't find the exact Model Number to the old stove so I just took the old thermostat knob out and looked for pictures on the PartSelect site that matched up. I found one that was almost an exact match so I decided to take a chance and order it. I was so happy when I received my replacement. It was a perfect fit. All I had to do was take the old knob out and put the new one in. Thanks PartSelect!

Parts Used:

Wanda from New Rochelle, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

light bulb in water ice freezer door went bad

I didn't. Don't know how to get to light bulb to change it for this specific model

Parts Used:

Light Bulb - 40W

Carl from RIVERSIDE, CA
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers

7 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

A high flame was coming out of the side of the burner

Easy......pulled out the old one easily and popped in the new one.......saved a lot of money...no repair bill for either diagnostic fee or assembly fee ...No mark up for the part either. Very happy mom!

Parts Used:

KAY from BRIDGEPORT, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Freont Burners Of Both Units Had Rusted Though Over The Years Of Boilover.

Lifted lid, removed old burner units, replace with new ones. In less than two min. Was back up and cooking.

Parts Used:

Angelo W. from Chirfland, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Replacing the bulb in the freezer side

Removed the ice brucket,
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.

Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas.

Parts Used:

Light Bulb - 40W

Yafa (and David) from Bothell, WA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

5 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

gas range knob and oven knob for my magic chief stove broke

After going to Homedepot, Sears, Lowes and other hardware stores I reached out to some folks at my job i was recommended to order the parts from PartSelect. I spent the Christmas and New Years Holiday in a mess. I really could not cook like i wanted to. I ordered the parts within a week it came. I am thankful you to guys no more drama, caos or worries. I highly recommend this site very easy to install. thank you

Parts Used: