All Installation Instructions for Whirlpool Refrigerator 2VED21ZKFN01

Freezer 4-15 F refrigerator 50 - 55 F

Just follow youtube examples. Work in freezer. Troubles was I didn't fix the problem. Experts say thermostat is the best one to replace (53%). Anyway they are not always right.

Parts Used:

Refrigerator Bimetal Defrost Thermostat

Chingnan from SUGAR LAND, TX
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Ice maker would not distribute ice, maintenance repaired

Maintenance completed. Some difficulty.

Parts Used:

Refrigerator Crisper Drawer With Handle

Jacob from PHOENIX, AZ
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours

1 person found this instruction helpful.

Was this instruction helpful to you?

leaking water in freezer

with vidio

Parts Used:

Refrigerator Bimetal Defrost Thermostat

allen from LANCASTER, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

1 person found this instruction helpful.

Was this instruction helpful to you?

drawer was broken

slid the new drawer in place

Parts Used:

Refrigerator Crisper Drawer With Handle

glenn from HAMPTON, TN
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Fridge door clunked when opening

Saw online info video explaining the possible cause and how to fix it. Ordered upper closing cam. Removed top hinge cover and hinge, removed door set it on a table. Removed old cam installed new cam tightened the retaining bolt put the door back on aligned it with freezer door and bolted it down snug. No more noise and it took less the half and hour.

Parts Used:

Refrigerator Lower Door Closing Cam

Peter from TRAVELERS RST, SC
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set

1 person found this instruction helpful.

Was this instruction helpful to you?

Door would not close properly

First I removed the three screws on the top hing of the refrigerator door so that we could lift it off the bottom hing. Socket wrench bits for my drill made that fast and simple. I lifted the door off the bottom hing to find the door closing plastic cam to be broken in several pieces. The hardest part was getting the cylinder shape piece that had broken off the cam out from inside the door. This way we would be able to insert the new piece. Needle nose pliers are the right tool for that job since the hole is small and the plastic just frays under force from regular pliers. It took some force and patience to get that out, but once all the broken pieces were removed, reassembly was quick and easy

Parts Used:

Refrigerator Lower Door Closing Cam

Thomas from Abington, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set

1 person found this instruction helpful.

Was this instruction helpful to you?

Put in a drawer!

Didn't do anything.

Parts Used:

Refrigerator Crisper Pan

Deborah from INDIANAPOLIS, IN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

end cAPS BROKEN from shelf

attach caps to each end of shelf and fixed to door

Parts Used:

Refrigerator Shelf Retainer End Cap

Lee from AMARILLO, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Refrigerator door not closing properly

We’d had the refrigerator repaired a year ago by the service department of our local appliance store. Turns out the service tech somehow used the wrong screw when replacing the door cam, causing it to rub on the cams and causing premature wear. After watching the provided repair video, it took about 10 minutes to remove the door, replace the cams and reinstall the door. Saved well over $100 and had the job done right this time.

Parts Used:

Refrigerator Installation Screw

Bruce from MONTGOMERY, AL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

1 person found this instruction helpful.

Was this instruction helpful to you?

One of the front wheels was broken in half.

Very easy. Left the front of the refrigerator so it is approx. 4 inches of the floor. (used a two by four. Removed the screws (one for each roller). Removed the rollers and replaced with new rollers. Reinstalled the screws with secures the rollers to the refrigerator. Done

Parts Used:

Refrigerator Front Roller Kit

John from INNSBROOK, MO
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

1 person found this instruction helpful.

Was this instruction helpful to you?

Broken wheel on leveling roller

I removed one bolt and took out the old roller after first blocking up the fridge. Then I was puzzled for a moment because the hole in the new assembly was not tapped. But then I saw that the old bolt was a self tapping bolt. I used it to tap the hole then removed it and installed the new assembly. No sweat job.

Parts Used:

Refrigerator Front Roller Kit

Max from Jonesboro, AR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

refrigerator door would not stay closed , I would close the door and it would bounce back out , I had to close the door by holding it closed each time I opened it

I watched the video, removed the top three screws , took the door off , put the door on the floor and removed the part with a socket.Then I put the new part in after lubricating . I picked the door up put it on the stem below , replaced the three screws and closed the door . The video was a big help was very easy to do and the part was quickly shipped .Thank you for all your help . Patricia

Parts Used:

Refrigerator Installation Screw

Refrigerator Lower Door Closing Cam