All Installation Instructions for Kenmore Refrigerator 25368892015

No freezer shelf came with our new refrigerator.

No long shelf came with our new refrigerator, Frigdaire did not have one so I went on-line from you and it fit perfectly, now everything does not have to be in one big heap.

Parts Used:

Freezer Shelf

TRACY from MAPLE GROVE, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

19 of 23 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The original door gasket was in very bad condition due to neglect.

Easily removed the original door gasket starting at an upper corner by pulling the old gasket off completely. I then cleaned the area where the new gasket was to be pressed into the channel on the door of the fridge. I also cleaned the area on the fridge where the new gasket would seat upon completion of the installation.

With that completed, I began in the upper right corner of the door, easily pressing the new gasket into the channel on the fridge door. I then pressed the upper left hand corner of the gasket into place, into the channel on the door. I then pressed the entire upper horizontal part of the gasket into the channel along the top of the fridge door.

I then pressed the left and right vertical portions of the gasket into the channels on the fridge door. I then pressed the lower left corner of the gasket into place, followed by the lower right hand corner into place of the bottom channel of the door.

Lastly, I pressed the lower horizontal portion of the gasket completely into the channel of the bottom of the fridge door.

Finally, I rechecked all portions of the gasket to be sure they were securely fitted into the channel of the door.

Mission accomplished in less than 15 minutes. It's a piece of cake to make this repair!

Parts Used:

Refrigerator Door Gasket - White

GARY from SEMINOLE, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

16 of 16 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

the glass shelf shattered

I placed the glass into the shelf frame and then I put the shelf and frame back into the refrigerator.

Parts Used:

Shelf Glass Insert - Glass ONLY

Steven from Merrick, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

25 of 44 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

plastic hook broke

just snap the new piece in place.

Parts Used:

Refrigerator Door Shelf Bin

Christina from Tacoma, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

16 of 19 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Door seal on refrigerator was bad had to change took longer to remove new seal from packaging than removing old seal and reinstalling new seal it was a perfect fit and perfectly packaged ready to Install

Opened refrigerator door removed old door seal by pulling door seal loose from door with fingers installed new seal by pressing new seal back in by hand took roughly 10 minutes to do only issue I had was with delivery my package was sent to the wrong house and was received 3 days late

Parts Used:

Refrigerator Door Gasket - White

John from DECATUR, AR
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

14 of 14 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

cracked bottom hinge

My 4 year old grandson used the frig door as a swing.The bottom hinge cracked, then the door wouldn't seal. I propped the door up with some books, removed the broken hinge (2 bolts) and replaced with the new part. Simple fix on the door, only time will fix the 4 year old!

Parts Used:

Lower Hinge Bracket

LEE from LEO, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

16 of 21 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

FREEZER WAS COLD FRIDGE WARM

YOU TUBE VIDEO POINTED ME IN THE RIGHT DIRECTION. USED MULTI METER TO CHECK FOR VOLTAGE. NONE, REPLACED DEFROST HEATER. WORKS LIKE A CHARM, PART DELIVERED TO MY DOOR FOR LESS THAN $60.00, IN TWO DAYS FROM PARTSELECT. FIXED IT MYSELF FOR LESS THAN THE COST OF A SERVICE CALL.

Parts Used:

Defrost Heater

JEFF from OLIVET, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers

15 of 18 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Tha part was broken

Very easy

Parts Used:

Refrigerator Door Shelf Bin

Refrigerator Crisper Pan

yadira from mcallen, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

16 of 22 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Plastic retainer on end had broken

Just popped it onto retainer nubs on door. Had been a little concerned, as it was replacing part # 240337900, but it fit just fine.

Parts Used:

Refrigerator Door Shelf Retainer Bin

Jonathan from Portland, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

14 of 16 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken meat tray support rail

Pull out the shelf and remove the one screw that holds the support rail in place. Remove broken rail, slip in the new one, then replace the screw. Done!

It takes longer to remove items from shelf and clean it than it does to replace the part.

Parts Used:

Drawer Support Rail - Right Side

Henry from Newbury, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

14 of 16 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The ends broke from the rails.

I unscrewed the old rails and took the number to order on the first day. The order came on the 3rd day. Can you imagine such fast service.
My daughter is a single mom with 4 children, one of whom was responsible for the breakage. I am the grandmother and was very grateful for the fast service and great price. The drawer was installed in 10 minutes. I just screwed the old screw into the new part and replaced the drawer. Thanks

Parts Used:

Drawer Support Rail - Right Side

Drawer Support Rail - Left Side

Maria from Sault Sainte Marie, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

12 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Plastic Shelf Broke

Snapped in place in less than 30 seconds

Parts Used:

Refrigerator Door Shelf Bin

Jim from Carlsbad, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

11 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Bottom shelf on door cracked and broke

I ordered the Door Shelf Bin from PartSelect.com on Friday and received it on Saturday!! I was shocked, but thrilled. The easy to use diagram helped me to pick the right part and I easily replaced the broken one. I have already started to recommend PartSelect.com I was so thrilled with their service!

Parts Used:

Refrigerator Door Shelf Bin

Jamie from Greensburg, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

12 of 14 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Coming from the refrigerator, there was an intermittent "clicking noise", occurring about every 30 seconds. The frig. eventually failed .

I removed the back cover and removed the clip holding the compressor- run capacitor and start relay. I replaced these 2 components and clean the dust from the frig., and from the bottom of the floor. I replaced the back cover ; Loss about $300 worth of meat when when the frig. failed. Then I thought that, during these turbulent times, there are many which don't have a refrigerator or any meat to place in it, The refrigerator is "running" normal again.

Parts Used: