All Installation Instructions for Kenmore Refrigerator 25368882011

Wrong size

I sent the rack back to the address on the invoice and never received a refund. I was never able to get through on the phone line to speak with someone or to leave a message.

Parts Used:

Freezer Shelf

Jean from GENOA CITY, WI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

bought brand new and kick plate was missing

just snap it on

Parts Used:

Kickplate Grille

Lloyd from HASKELL, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Evaporator was freezing up and was running non stop

I tested the components in the refrigerator defrost function. I used digital multimeter and checked for continuity. Defrost thermostat must 32 degrees or lower.

Parts Used:

Defrost Thermostat

James from PHILADELPHIA, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

1 person found this instruction helpful.

Was this instruction helpful to you?

The Dairy door was cracked by an item in the refrigerator and broke into two pieces

This was not technical at all. The old door fell out and the replacement door snapped right into position. It was simple.

Parts Used:

Dairy Door - Clear

George from Pottsville, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Noisy condenser fan

Remove lower cardboard refrigerator panel. Carefully pull existing cracked fan blade off of the motor shaft and replace with new fan blade. Reinstall cardboard panel.

Parts Used:

Fan Blade

Ben from FRANKLIN, TN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Door switch was no longer making my light go on when door opened

I used the youtube you provided. It was pretty straight forward, but I had to make a trip to the hardware store for a bit (hex wrench) to remove the hex bolt head style screws. I was only expecting to need phillips or flathead. I managed to remove one with a set of pliers, and the brought that example to the store for size reference when buying the bit to fit my black and decker drill. The rest was easy.

Parts Used:

Door Light Switch

Susan from VIRGINIA BCH, VA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

1 person found this instruction helpful.

Was this instruction helpful to you?

Refrigerator did not cycle

Installation was fairly straight forward. The major complaint is that the problem returned 2 weeks later. I don’t know if I care to re-invest in another switch.
Now what?

Parts Used:

Cold Control Thermostat

JACOB from YOUNGSTOWN, OH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

refer door hinges were lost during the move in to our first home.

The center door hinge was still attached to the refridgerator so I only had to install the bottom and top hinges. I also moved the door handles to the other side so the doors open the "right" way. The hinges were just 2 bolts and 3 screws. Now, just if the repair man from our home warrentee company would show up to fix the refridgerator. It's blowing hot air!!!

Parts Used:

Lower Hinge Bracket

Single Washer

Lower Hinge Pin

Upper Hinge

edith from woodbridge, VA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

8 of 22 people found this instruction helpful.

Was this instruction helpful to you?

GASKET OLD LEEKING OUT COLD AIR FROM FRIDGE FOOD WARM

SO SIMPLE I JUST FOLLOWED THE VIDEO THE PARTS SELECT PROVIDED ON THERE WEB SITE AND WALA DONE IN 5minutes Wow THAT EAZY NO TOOLS NESSECCARY JUST A SCREWDRIVER

Parts Used:

Refrigerator Door Gasket

Ricky from BUENA PARK, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Freezer shelf was showing rust & needed to be replaced

Removed old shelf & popped in the New one. Very easy ??

Parts Used:

Freezer Shelf

Linda from FENTON, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

My gasket was worn out and torn.

The repair was much more simple to install than I would have imagined. I watched the video provided on your website. What a simple solution to a nagging problem. My fridge looks great again.

Parts Used:

Refrigerator Door Gasket

Sharon from FREDONIA, KY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

refrigerator crisper pan broken

replaced it

Parts Used:

Refrigerator Crisper Pan

DONALD from TOPEKA, KS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Had a broken part in the door that holds condiments in

Removed broken part and then snapped in new part

Parts Used:

Door Shelf Retainer Bar

Janette St from KALISPELL, MT
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Old gasket was torn and falling out

I removed the old gasket and cleaned the area. Then I started at the bottom and pressed the new gasket into the door. You must use firm pressure and go all around. It does get tricky hear the end as it seems like there is excess, but it will fit. Just keep using firm pressure.

Parts Used:

Refrigerator Door Gasket