All Installation Instructions for Kenmore Refrigerator 2536152201A

Broken Door Rack

Snapped new door rack into place.

Parts Used:

Door Rack

Bert from Saint Augustine, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Broken fan blade ,I forgot to unpluge before cleaning

I did it just like the video it was that easy! love this web site amazing!

Parts Used:

Fan Blade

Melissa from Anderson, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers

Was this instruction helpful to you?

Cover (shelf) that holds the hydrators was cracked.

Went on line to PartSelect, found and ordered the part. It was here in two days. I removed the old shelf, inserted the new and the frig was as good as new. I was extremely pleased with the ease in identifying the part and the speed of delivery.

Parts Used:

Crisper Pan Cover

Mary Lou from Myrtle Beach, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

no heat when drying

Replaced thermo-fuse

Parts Used:

Door Rack Freezer

Glen from North Tonawanda, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

Was this instruction helpful to you?

broke fan blade while trying to remove dust.

Removed old fan motor and installed new one.Not much room for big hands back there.Flexible extensions valuable on this job.

Parts Used:

Refrigerator Condenser Fan Motor Kit

Jack from Kiefer, OK
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set

Was this instruction helpful to you?

Fan would stop or turn slowly. outside of refridg hot

took off cardboard removed two screws holding fan housing. Removed new fan and housing from box and mounted new fan to new housing (two screws). Installed new fan and housing. reinstalled cardboard and plunged in power cord. Perfect fit.

Parts Used:

Refrigerator Condenser Fan Motor Kit

Rusty from Howell, NJ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set

Was this instruction helpful to you?

while cleaning the condenserI accidentally hit the fan blade and broke it

Had my 3 year old remove the 4 screws to holds the carboard in place. Pryde the old fan blade off with a screwdriver. slid the new fan blade on to the shaft then my 3 year old put the screws back in.

Parts Used:

Fan Blade

james from vandergrift, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

Rattling Noise from behind frig

Initially, I traced the noise down to the evaporator motor area. I thought it was the fan blade so I ordered and changed it. Noise level better but still not good. Then I ivestigated problem area again. Removed the motor,discoverd that the motor shaft was loose /drifting which caused the "hummm" and uneven fan blade rotation. Orderd and installed new motor and all is good.

Parts Used:

Refrigerator Condenser Fan Motor Kit

Michael from Rockford, MI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

Was this instruction helpful to you?

has lights,no fan or compressor

jump thermostat,fan and compressor came on, ordered thermo from this excllent parts supplier, part came in 4 days later, it was exact replacement, works exactly right!

Parts Used:

Cold Control Thermostat

francis from arlington, WA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

Was this instruction helpful to you?

broken door rack

snapped old one out by hand and installed new one with ease been broken for year could not believe how easy it was

Parts Used:

Door Rack

Mike from Whitmore Lake, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Broken blade on fan.

Used needle nose pleirs to slide the old fan off.Then slide the new fan on the spindle.The video really made this easy!

Parts Used:

Fan Blade

Deborah from Ridge Spring, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

Was this instruction helpful to you?

Broken door rack

We simply replaced the door rack. It was extremely easy with the quick delivery of the product!

Parts Used:

Door Rack

Melissa from Kansas City, MO
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Needed a replacement for a broken doo rack

Snapped right in place, no problems at all.

Parts Used:

Door Rack

Ron from Tiffin, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

the racks on my doors had snapped and I needed new ones

I just put them right on. Took about a minute to figure on the right way to put the racks on (push them down from the top, until they snap into place), and it was done in less than five minutes. I was worried that this wouldn't work - I couldn't find the exact item # to replace the racks that had been on there. But it turns out that they are pretty interchangeable - the sub racks that the website suggested worked perfectly for me.

Parts Used:

Door Rack