1353 - Overview
Models starting with 1353
Click on the best match to narrow your results.
- 1353 (0601353039) Bosch Angle Grinder ((060039) Angle Grinder)
- 1353*0A Roper Range (GAS RANGE)
- 1353*1A Roper Range (GAS RANGE)
- 1353*2A Roper Range (GAS RANGE)
- 1353*3A Roper Range (Range (gas)*)
- 1353*4A Roper Range (Range (gas)*)
- 1353^0A Whirlpool Range
- 1353^1A Whirlpool Range
- 1353^2A Whirlpool Range
- 1353^3A Whirlpool Range
- 1353^4A Whirlpool Range
- 1353W0A Roper Range (Freestanding, Gas)
- 1353W1A Roper Range (Freestanding, Gas)
- 1353W2A Roper Range (Freestanding, Gas)
- 1353W3A Roper Range
- 1353W4A Roper Range (Gas)
Exact Part matches for your search term
[Viewing 2 of 2]
Fan
This part number matches the current model number 1353
PartSelect #: PS11937532
Manufacturer #: 1353
No Longer Available
Spacer
This part number matches the current model number 1353
PartSelect #: PS12184799
Manufacturer #: 1353
No Longer Available
Keep searches simple, eg. "belt" or "pump".
2 Piece Broiler Pan
PartSelect #: PS971245
Manufacturer #: 4396923
This broiler pan and roasting rack set features a two-piece design that allows fat to drain away for cleaner cooking and reduced splatter. Made with a durable, high-heat resistant porcelain finish, it...
$63.09
In Stock
Heater Wire - 240V
PartSelect #: PS11757536
Manufacturer #: WPY311946
Made for use with older model Maytag brand series 06 Halo of Heat style electric clothes dryers, this pre-stretched heating element coil carries 240 volts.
No Longer Available
Broil Element
PartSelect #: PS340509
Manufacturer #: 326795
This five loop broil element has a hanger style mount.
No Longer Available
Range Hex Nut
PartSelect #: PS11738304
Manufacturer #: WP112432
10-32 hex - Sold Individually - Appliance originally takes 3 of this item.
$10.69
In Stock
Common Symptoms of models starting with 1353
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Burner would not heat
First i shut off the power since this is an electric cook top/range. I then removed the knob and the two screws that hold the burner switch in place. I removed the wires one at a time and connected each to the new switch. I then reattached the screws to the switch. The most difficult part to me was breaking off the switch stem at the right level. I got that done and finally selected the appropriate adapter for the stem/knob fit.
Parts Used:
-
Edward from Malvern, AR
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
27 of 35 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner quite heating discovered switch was the problem
lifted hood top unscrewed 4 small screws opening lid to switch housing took out 2 small screws that held the switch and then transfered wires to new switch replaced new switch with 2 new screws and back to working again walla! Time spent less than 30 minutes very simple as the instructions were very self explainatory.
Parts Used:
-
Ronald from McClelland, IA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
9 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Purchased home but stove had no broiler pan.
-
Raymond from BLOOMINGTON, MN
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
16 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!