130902-1133-01 Briggs and Stratton Engine - Overview

Sections of the 130902-1133-01

[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Engine Air Cleaner Cartridge Filter – Part Number: 396424S
Engine Air Cleaner Cartridge Filter
PartSelect #: PS8967621
Manufacturer #: 396424S
$26.95
  Special Order
Gasket-breather – Part Number: 27549S
Gasket-breather
PartSelect #: PS8943888
Manufacturer #: 27549S
This is the gasket that helps to provide an air tight seal for the breather assembly. It is a high quality item that is supplied by original equipment manufacturer for use with Briggs and Stratton and...
$6.95
  Special Order
Cap-oil Fill – Part Number: 281658S
Cap-oil Fill
PartSelect #: PS8945667
Manufacturer #: 281658S
This manufacturer approved replacement part is specially produced for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. It is utilized to keep the oil in the t...
$7.95
  Special Order
Muffler – Part Number: 393010S
Muffler
PartSelect #: PS8962128
Manufacturer #: 393010S
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of this mu...
$39.95
  Special Order
Seal-Oil – Part Number: 391485
Seal-Oil
PartSelect #: PS8961652
Manufacturer #: 391485
$17.95
  Special Order
Deflector-muffler – Part Number: 395700
Deflector-muffler
PartSelect #: PS8960069
Manufacturer #: 395700
$27.95
  Special Order
Clutch-starter – Part Number: 399671
Clutch-starter
PartSelect #: PS8968281
Manufacturer #: 399671
Hard starting may come from the recoil system instead of the carburetor or spark plug. If the rope pulls but the engine does not turn, the starter clutch may be worn, dirty, or jammed. The clutch turn...
$70.95
  Special Order
Arrestor-spark – Part Number: 399541
Arrestor-spark
PartSelect #: PS8968274
Manufacturer #: 399541
$48.95
  Special Order
Filter-pre Cleaner – Part Number: 271466
Filter-pre Cleaner
PartSelect #: PS8937831
Manufacturer #: 271466
This is an OEM approved replacement part designed for gas trimmers/brush cutters. Its purpose is to filter out dust and debris from the air that goes into the unit. Over time it will get dirty and clo...
$7.95
  Special Order
Key-flywheel – Part Number: 222698S
Key-flywheel
PartSelect #: PS8925657
Manufacturer #: 222698S
This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Plier...
$5.95
  In Stock
Gasket-fuel Tank – Part Number: 270073
Gasket-fuel Tank
PartSelect #: PS8939191
Manufacturer #: 270073
It is an authentic manufacturer-sourced replacement gasket which is specially designed for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. This component pro...
$8.95
  Special Order
Filter-a/c Foam – Part Number: 270447
Filter-a/c Foam
PartSelect #: PS8939227
Manufacturer #: 270447
This is an authentic Briggs & Stratton replacement part that has been sourced from the original manufacturer to be used with lawnmower engines. The air cleaner is used to prevent contaminants from ent...
$19.95
  Special Order

Common Symptoms of the 130902-1133-01

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
5 HP Briggs and Stratton chipper shredder - no spark
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
Parts Used:
Armature-magneto
  • Thomas from ALFRED, ME
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
19 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Generator would not start, Birggs & Stratton recommended to replase Gasket Exhaust.
Remove the spark suppresser, 4 face screws, 2 bottom screws and the two screws the hold the gasket. I also had to back out the top screw of the cover it blocked and prevented the removal of the gasket.
Parts Used:
Gasket-exhaust
  • Alberto from PALMETTO BAY, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
12 of 46 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!