130902-1015-01 Briggs and Stratton Engine - Overview

Sections of the 130902-1015-01

[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Gasket-fuel Tank – Part Number: 270073
Gasket-fuel Tank
PartSelect #: PS8939191
Manufacturer #: 270073
It is an authentic manufacturer-sourced replacement gasket which is specially designed for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. This component pro...
$8.95
  Special Order
Filter-a/c Foam – Part Number: 270447
Filter-a/c Foam
PartSelect #: PS8939227
Manufacturer #: 270447
This is an authentic Briggs & Stratton replacement part that has been sourced from the original manufacturer to be used with lawnmower engines. The air cleaner is used to prevent contaminants from ent...
$19.95
  Special Order
Spacer-air Cleaner – Part Number: 280374
Spacer-air Cleaner
PartSelect #: PS8942160
Manufacturer #: 280374
$12.95
  Special Order
Gasket-air Cleaner – Part Number: 271139S
Gasket-air Cleaner
PartSelect #: PS8939805
Manufacturer #: 271139S
$6.95
  Special Order
Filter-pre Cleaner – Part Number: 271466
Filter-pre Cleaner
PartSelect #: PS8937831
Manufacturer #: 271466
This is an OEM approved replacement part designed for gas trimmers/brush cutters. Its purpose is to filter out dust and debris from the air that goes into the unit. Over time it will get dirty and clo...
$7.95
  Special Order
Key-flywheel – Part Number: 222698S
Key-flywheel
PartSelect #: PS8925657
Manufacturer #: 222698S
This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Plier...
$5.95
  In Stock
Order within the next 3 hrs and your part ships today!
Alternator – Part Number: 494254
Alternator
PartSelect #: PS8988287
Manufacturer #: 494254
$147.95
  Special Order
Gasket-breather – Part Number: 27549S
Gasket-breather
PartSelect #: PS8943888
Manufacturer #: 27549S
This is the gasket that helps to provide an air tight seal for the breather assembly. It is a high quality item that is supplied by original equipment manufacturer for use with Briggs and Stratton and...
$6.95
  Special Order
Engine Air Cleaner Cartridge Filter – Part Number: 396424S
Engine Air Cleaner Cartridge Filter
PartSelect #: PS8967621
Manufacturer #: 396424S
$26.95
  Special Order
Pulley-starter – Part Number: 295871
Pulley-starter
PartSelect #: PS8942071
Manufacturer #: 295871
Difficulty pulling the starter rope or a cord that stays extended can result from a damaged recoil pulley. This wheel guides and stores the rope while helping turn the engine during starting. Similar ...
$25.95
  Special Order
Kit-bushing/seal – Part Number: 297565
Kit-bushing/seal
PartSelect #: PS8942296
Manufacturer #: 297565
$35.95
  Special Order
Gasket-cylinder Head – Part Number: 272157S
Gasket-cylinder Head
PartSelect #: PS8941204
Manufacturer #: 272157S
This item is a genuine OEM sourced part that is intended to be used with small engines from Briggs & Stratton and Toro. The gasket is used to seal the connection between the cylinder and the head. A h...
$11.95
  Special Order

Common Symptoms of the 130902-1015-01

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
5 HP Briggs and Stratton chipper shredder - no spark
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
Parts Used:
Armature-magneto
  • Thomas from ALFRED, ME
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
19 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Generator would not start, Birggs & Stratton recommended to replase Gasket Exhaust.
Remove the spark suppresser, 4 face screws, 2 bottom screws and the two screws the hold the gasket. I also had to back out the top screw of the cover it blocked and prevented the removal of the gasket.
Parts Used:
Gasket-exhaust
  • Alberto from PALMETTO BAY, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
12 of 46 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!