130202-1686-05 (Series) Briggs and Stratton Engine - Overview
Sections of the 130202-1686-05
[Viewing 8 of 8]
Keep searches simple, eg. "belt" or "pump".
Engine Air Cleaner Cartridge Filter
PartSelect #: PS8967621
Manufacturer #: 396424S
$26.95
Special Order
Gasket-breather
PartSelect #: PS8943888
Manufacturer #: 27549S
This is the gasket that helps to provide an air tight seal for the breather assembly. It is a high quality item that is supplied by original equipment manufacturer for use with Briggs and Stratton and...
$6.95
Special Order
Seal-oil
PartSelect #: PS8947595
Manufacturer #: 294606S
This is an original replacement part manufactured for use with outdoor power equipment. The oil seal is used with a variety of different models of equipment and is commonly used to form a seal where c...
$17.95
Special Order
Cap-oil Fill
PartSelect #: PS8945667
Manufacturer #: 281658S
This manufacturer approved replacement part is specially produced for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. It is utilized to keep the oil in the t...
$7.95
Special Order
Gasket-fuel Tank
PartSelect #: PS8943841
Manufacturer #: 272409S
This is a Genuine Manufacturer Sourced replacement part used on a variety of Engines. This part provides an air tight seal for mounting the Gas Tank. This part is made out of Composite Material and it...
$6.95
Special Order
Carburetor
PartSelect #: PS8961562
Manufacturer #: 397135
This is an authentic Briggs & Stratton replacement part that has been sourced from the original manufacturer to be used with small engines. The carburetor assembly connects to the air cleaner and the ...
$254.95
Special Order
Kit-Oil Gard
PartSelect #: PS8961583
Manufacturer #: 398182
This oil guard kit helps manage oil flow and containment within the system. Designed for durability, it supports proper lubrication and cleaner operation.
$147.95
Special Order
Clutch-starter
PartSelect #: PS8968281
Manufacturer #: 399671
Hard starting may come from the recoil system instead of the carburetor or spark plug. If the rope pulls but the engine does not turn, the starter clutch may be worn, dirty, or jammed. The clutch turn...
$70.95
Special Order
Filter-pre Cleaner
PartSelect #: PS8937831
Manufacturer #: 271466
This is an OEM approved replacement part designed for gas trimmers/brush cutters. Its purpose is to filter out dust and debris from the air that goes into the unit. Over time it will get dirty and clo...
$7.95
Special Order
Common Symptoms of the 130202-1686-05
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
5 HP Briggs and Stratton chipper shredder - no spark
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
Parts Used:
-
Thomas from ALFRED, ME
-
Difficulty Level:Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
19 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace fuel diaphragm, fuel pickup tube and air cleaner
This 5hp B&G was manufactured in 1985! Had been garage kept and always dependable. After 10 years of non use the carb wasn't getting gas. Removed air cleaner box, muffler and crankcase breather to easily remove carb, replace parts and reassemble.
Parts Used:
-
Gerald from MAULDIN, SC
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Socket set
7 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old diaphragm dried up
Tore carburetor off leaf blower and replaced. To do that require taking off the air cleaner removing the gas tank and all the brackets holding the controls on it. And keeping track of all the screws and Wires that control choke and throttle. I took several photographs. I did not need all the gaskets and jet’s that were included in the kit but it had what I needed.
Parts Used:
-
Steven C from CENTREVILLE, MI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
6 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!