This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
In Stock
Order within the next 7 hrs and your part ships today!
This genuine OEM replacement part is a water filter for your fridge or freestanding ice maker. The filter is used to remove contaminants and particles from the water, to ensure a clean and fresh taste...
$96.40
In Stock
Order within the next 7 hrs and your part ships today!
This is a light switch for your refrigerator. It activates when the door of your appliance is opened, and it will turn the light inside on and off. You will need to replace this part is if your light ...
$36.66
In Stock
Order within the next 7 hrs and your part ships today!
This bin temperature sensor is for ice makers.
The bin temperature sensor monitors the temperature in the ice maker bin and sends the temperature reading to the electronic control board.
Disconn...
$93.90
In Stock
Order within the next 7 hrs and your part ships today!
This fan motor is most times used with frost-free refrigerators with a condenser coil. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compress...
$159.49
In Stock
Order within the next 7 hrs and your part ships today!
This Refrigerator Ice Maker Installation Kit connects the house water supply, to the refrigerator for ice maker and water dispenser operation. This kit includes 15-ft of copper tubing, (1) saddle valv...
$54.75
In Stock
Order within the next 7 hrs and your part ships today!
Questions And Answers for 10689593102
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Danny
June 24, 2021
Ice maker stopped making ice and i did the normal routine by using afresh cleaner and cleaning the coils but still not making ice.
For model number 10689593102
Hi Danny,
Thank you for your question. If the room temperature is too low, the ice maker will shut off. Make sure that the room temperature is above 55°F. Also, check to see that the control is turned on and that the ice maker is plugged into an outlet that is working. If the drain line is kinked, remove the kinks. We hope this helps! Good luck with the repair!
Was this helpful?
Thank you for voting!
Mikah
March 3, 2023
My ice maker is making way to much ice what could the problem be and is there a reset button
For model number 10689593102
Hi Mikah, thank you for your query. If your ice maker is making too much ice, make sure that the ice bin is directly below the ice maker. If the ice bin is not in the correct place, the shutoff arm will not work properly, and the ice maker will continue to produce ice. If you have removed the shelf from the freezer, there will be too much space between the ice maker and the ice bin. Replace the freezer shelf to have the correct bin spacing. If this does not help, then you may need to check the following parts: the ice maker switch, part number PS12348182, which shuts off ice production if it detects the water filter is not in place, and the electronic control board, part number PS12346592. We hope this solves your problem!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
I'm an hvac/r technician, and regularly work on ice machines. Begin my pulling the white over beneath the control panel. It snaps in place so pull on the bottom then left out. 1/4 nut driver is all you need, and remove the screw holding the bin thermistor clip to the side. Up to the right , beneath the control panel, behind the plastic panel you previously removed is the mollex connector. Unplug the thermistor and follow instructions in reverse to reinstall.