The lower door closing cam is used in refrigerator doors, it can be located on the fresh food side or the freezer side. It helps hold the door open. This cam is made out of plastic, so it might crack ...
$12.62
In Stock
Order within the next 6 hrs and your part ships today!
This manufacturer-certified Refrigerator Door Shelf Bin, also known as the crisper bin and door shelf bin, is made of clear plastic, and is easy to install. It is used to hold items in the fridge door...
$57.19
In Stock
Order within the next 6 hrs and your part ships today!
The Door Cam is a black plastic part which helps the door pivot shut while keeping the door and hinge in proper alignment. Lubricating this part upon installation may help it move easier. It attaches...
$12.62
In Stock
Order within the next 6 hrs and your part ships today!
This OEM, clear convertible meat drawer can be used to store meats or vegetables and is designed for the lower portion of your refrigerator, generally. It has its own cold air duct to allow cold air f...
$97.27
In Stock
Order within the next 6 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 6 hrs and your part ships today!
Helps to maintain the proper temperature in the freezer and fresh food compartments. This part has been updated by the manufacturer and may be difference in appearance.
$122.50
In Stock
Order within the next 6 hrs and your part ships today!
Questions And Answers for 10644073600
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Christopher
October 13, 2025
kenmore cold spot refrigerator freezes food. then temp in fridge in freezer & fridge get warm. replaced thermostat, defrost thermostat...I did notice if i unplug fridge and plug back in compressor starts
For model number 10644073600
Hello Christopher, thank you for reaching out. The part that likely needs to be replaced is the defrost control board, also known as the adaptive defrost control board (ADC). This board manages the compressor, evaporator fan, and defrost cycle. When it fails, it can cause the refrigerator to freeze food and then stop cooling until it’s unplugged and plugged back in, which temporarily resets the board and restarts the compressor. The part number is PS372261. We hope this solves your problem!
Kenmore coldSpot Model 10644073600 side by Side. Fridge goes to 32 freezes fruit. Then temp will go to 40, I assume that's when defrost is on. I had some spare parts. This is what I tried but no luck. Swapped out thermostat, control board,defrost thermostat & air diffuser damper looks good. I started to notice a little bit of frost on freezer wall. probably getting to warm at some point then refreezing . Never seen anything like this before ? Thanks again
For model number 10644073600
Hi Chris, thank you for reaching out. Since you have replaced the thermostats, control board, and damper, the defrost heater, part number PS11740458, is a highly probable cause. A faulty defrost heater causes temperature fluctuations, freezing food, and frost buildup by allowing ice to block the airflow between the freezer and fridge compartments. The system runs irregularly to compensate, causing uneven cooling and localized freezing. We would recommend replacing it to fix the issue. We hope this solves your problem!
Remove the top hinge cover. Removed the top hinge support. Lifted the door from the bottom support. Old door cams were worn completly flat. Replaced the lower door cam and closing cam use a little vasalene for lubricant on the cam surfaces. Placed the door back on the lower hinge support. Replaced the top hinge support. Door is closing great now. Thanks for the quick part deliver.
