Microwave Caps and Lids

Microwave Wave Guide Cover

★★★★★

★★★★★

7 Reviews

Microwave Waveguide Cover

★★★★★

★★★★★

5 Reviews

You need this genuine Whirlpool Microwave Inlet Cover to keep your microwave running at its best. It's also known as a waveguide cover. What does it do? It protects the waveguide channel, which is critical for your microwave's performance, from any food splatters or debris. This means your microwave continues to work efficiently and your food cooks evenly. Made expressly for Whirlpool microwaves, this cover ensures the perfect fit for efficiency. You've got to be safe when installing it - always unplug your microwave first. Remember, parts can look similar, but each model needs its specific part for optimal performance, so make sure to check if it fits your model. Using this quality cover is part of good microwave care. With this in place, your microwave is set to perform like new for longer. Trust the Whirlpool brand for high-quality, durable, and functional design in every appliance part. Choose Whirlpool for reliability and optimal results.

Microwave Cover This microwave waveguide cover, also known as a stirrer blade cover, is an essential component for maintaining optimal cooking performance. It protects internal parts from food splatter while allowing microwaves to pass through and distribute heat evenly. Measuring approximately 11 inches in height, 0.20 inches in width, and 1 inch in depth, this durable cover helps ensure consistent temperatures and even cooking results. If the cover becomes damaged or worn, it can lead to uneven heating or sparking inside the appliance, so timely replacement is important. Installation is simple and requires only a few minutes, making it an easy solution to restore your microwave’s efficiency.

Microwave Cover

★★★★★

★★★★★

4 Reviews

This waveguide cover protects the interior of the microwave by shielding key components from food splatter and moisture. Made from durable mica material, it helps prevent sparking and keeps the appliance operating safely and efficiently. Designed to match the original fit on select models, it replaces a worn or damaged cover and installs easily once the microwave is disconnected from power.

Microwave Cover

★★★★★

★★★★★

1 Review

Understanding that an appliance breakdown can be frustrating, we want to help you get your microwave back to prime condition with this genuine Frigidaire wave guide cover. This small but vital component ensures your microwave works efficiently, and is protected from food splatters and debris that can affect its performance. A microwave doesn't just heat your food ? it works through the complex process of guiding waves of energy directly to what you're cooking. If this process is compromised by a damaged or missing guide, your microwave won't function to the best of its ability. With this high-quality wave guide cover, you can easily bring your appliance back to its best, extending its longevity and ensuring it continues to deliver great results. This particular wave guide cover is perfectly shaped for a precise fit into certain models from Frigidaire, Electrolux, White Westinghouse, and Tappan to ensure seamless functionality. We recommend that you check that this part is the right fit for your appliance model before purchasing due to small differences that can exist. And remember, stay safe: always unplug your microwave before starting any part replacement or maintenance. Investing in this Frigidaire wave guide cover won't just keep your microwave performing well'it can also save you money in the long run by preventing more significant, costly repairs. Get your microwave back on track with this reliable, easy-to-install part.

Microwave Cover

Microwave Lower Handle End Cap - Stainless Steel

★★★★★

★★★★★

2 Reviews

This stainless steel lower handle end cap is a precision replacement part designed to restore the appearance and functionality of your microwave door. Measuring approximately 2 inches by 2.5 inches, it fits securely at the lower end of the door handle, covering and protecting the exposed edge. As part of the microwave’s shielding system, this component plays a role in maintaining the integrity of the door’s seal. For safety reasons, it is strongly recommended that a qualified technician perform the replacement, as improper installation may compromise the microwave’s shielding and result in radiation leakage. After installation, the appliance should be tested to ensure the door remains properly sealed and safe for use. This part is sold individually and is sourced directly from the original equipment manufacturer.

Microwave Mica Cover

★★★★★

★★★★★

1 Review

Having trouble with your GE appliance? Our authentic GE MICA COVER could be just the fix you need. This isn't just any part'it's the key to unlocking the best performance from your device. Made with high-quality mica, this cover's job is to keep your appliance safe and sound, protecting it from potential damage. Think of it like a shield, always on guard and aimed at maximum durability. Why is this so important? Because this little part plays a big part in making your appliance work efficiently and helping it last longer. Installation is a breeze too. This cover is designed to fit snugly onto your appliance, so you can secure it with minimal fuss. No need for advanced DIY skills, you'll have it sorted in minutes. The best part? This GE MICA COVER is genuine and tailored specifically for your GE appliance. No worries about mismatched parts; it's completely compatible and ready to help your appliance get back to its top-notch, brand-new condition. Try the GE MICA COVER and bring outstanding functionality and longevity back to your good old GE appliance. Keep your appliance protected, efficient and performing like new with this simple, but crucial part.

Microwave Cover

★★★★★

★★★★★

1 Review

Having issues with your Whirlpool microwave? It might be the Inlet Cover. This small part plays a big role and shields the waveguide channel in your microwave from debris and food splatters. Keeping it in good condition helps your appliance last longer and perform at its best. But not just any Inlet Cover will do. This one is a genuine OEM part specifically tailored to fit certain Whirlpool models. It's exact size and shape line up perfectly with specific model types, so it's important that you double check that it fits your microwave. Remember to unplug your microwave for safety while installing this part. While it's a small precaution, it's an important one. It's also crucial to be sure about your model's compatibility with this part, as minor model variations can occur. With this durable, high-quality Inlet Cover, you'll be back creating your culinary masterpieces in no time with your Whirlpool microwave working like new again.

Microwave Covr-inlet

★★★★★

★★★★★

1 Review

Is your microwave in need of some TLC? Meet the Whirlpool COVR-INLET, your microwave's little helper. This is not just an ordinary part, it's like a shield, protecting your microwave's waveguide channel from food splatters and debris. This means a cleaner channel so your microwave performs better, for longer. As a genuine OEM part, this COVR-INLET is designed for an ideal fit with select models of Whirlpool. It's like getting a custom-made suit for your microwave ? it just fits right! While it may look a lot like other products, it's important to make sure it's the correct one for your model considering there can be tiny differences in size or shape. And here's a handy tip for you: make sure to unplug your microwave before installing your new Whirlpool COVR-INLET. This will keep you safe and your appliance protected. By choosing Whirlpool, you're opting for quality, durability, and performance. And with this neat little part, your trusty microwave will be back up and running beautifully. So, is it high time you gave your microwave some love?