Jenn-Air Range Switches

Jenn-Air Appliance Parts
Shop By Part Type

Popular Jenn-Air Range Switches

Your Price
$72.86
  In Stock
Range Infinite Burner Switch - 8 Inch
★★★★★
★★★★★
14 Reviews
PartSelect Number PS11744487
Manufacturer Part Number WP7403P239-60
This infinite switch for eight inch range burners is almost three inches long. This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending power to the surface elements. Check the element and terminal block to ensure they are working properly. If they are in working order, check the infinite switch at the control panel for any wires that have overheated, or broken terminals to or from the infinite switch. If the infinite switch is damaged or malfunctioning, it will need to be replaced. Remember to unplug your range before beginning this repair.
Fixes these symptoms
Your Price
$113.52
  In Stock
Dual Surface Burner Switch Kit
★★★★★
★★★★★
5 Reviews
PartSelect Number PS2003583
Manufacturer Part Number 12002125
This switch is used to operate the dual surface burner.
Fixes these symptoms
Your Price
$198.20
  In Stock
Range Surface Element Control Switch
★★★★★
★★★★★
4 Reviews
PartSelect Number PS11749818
Manufacturer Part Number WPW10185286
This surface element control switch is for ranges. Surface element control switch turns the surface element on and off and controls how much heat the element produces. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
Your Price
$104.88
  In Stock
Infinite Switch - 8 Inch
★★★★★
★★★★★
9 Reviews
PartSelect Number PS11744412
Manufacturer Part Number WP74010824
Sold individually.
Fixes these symptoms
Your Price
$115.72
  In Stock
Dual Surface Burner Switch
★★★★★
★★★★★
2 Reviews
PartSelect Number PS11744018
Manufacturer Part Number WP74003122
This part has been updated by the manufacturer. This updated part now has 7 wire terminals instead of 5. The terminals are all labeled, however, the new switch needs to be tested before connecting the pilot lamp wire (P). To test the new switch: 1) Connect the Line Wires (L1 and L2), connect the Load Wires (H1 and H2). 2) Do not connect the pilot lamp (P) wire yet. 3) Reconnect the power to the range and turn on the new switch and one other switch. 4) Connect the leads of a volt meter on L1 of the new switch and P of the other switch you turned on. 5) If the volt meter reads 220V, the L1 and L2 wires on the new switch must be reveresed. 6) Disconnect power, reverse Line Wires if needed and connect the P wire. 7) Reconnect power to the range after reassembly.
Fixes these symptoms
Your Price
$204.10
  In Stock
Surface Unit Infinite Switch Kit
★★★★★
★★★★★
4 Reviews
PartSelect Number PS2076107
Manufacturer Part Number 700855K
This is a push-and-turn switch. This kit includes all necessary hardware to install the part. Switch comes with a D-shaped shaft.
Fixes these symptoms
Your Price
$126.84
  In Stock
Infinite Switch
★★★★★
★★★★★
2 Reviews
PartSelect Number PS11744449
Manufacturer Part Number WP74011489
Fixes these symptoms
Your Price
$91.91
  In Stock
Exhaust Switch - Black
★★★★★
★★★★★
1 Review
PartSelect Number PS11740768
Manufacturer Part Number WP3147265
Fixes these symptoms
Your Price
$72.11
  In Stock
Igniter Switch
PartSelect Number PS11742372
Manufacturer Part Number WP4330739
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
Fixes these symptoms
Your Price
$130.88
  In Stock
Infinite Switch - Low Heat
PartSelect Number PS11744272
Manufacturer Part Number WP74008940
Also known as the selector switch.

Related Parts