Jenn-Air Dishwasher Wheels and Rollers

Lower Dishrack Wheel

★★★★★

★★★★★

215 Reviews

This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult. This can happen due to normal wear and tear, and the part should be replaced if this occurs. Check your model number and user manual to make sure this part is correct. It attaches directly to the dishrack. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel. It measures roughly 3x6 inches.

Lower Dishrack Wheel Assembly

★★★★★

★★★★★

50 Reviews

This gray plastic lower dishrack roller is a part for your dishwasher. It attaches to the bottom of the lower dishrack, allowing it to move in and out smoothly. If the lower dishrack stops moving in and out easily or preventing you from being able to shut the dishwasher door, inspect the dishrack roller for damage. The assembly includes 2 rollers and the bracket that attaches to the dishrack (parts are not sold separately). This assembly is sold individually, so you will need 4 assemblies to replace them all in your appliance. For this easy repair, start by removing the lower dishrack from the appliance and set it on the counter. Use a screwdriver to pry off the old roller assembly from the lower tabs. Align the new part on the dishrack by snapping it in place.

Lower Wheel Assembly

★★★★★

★★★★★

14 Reviews

This part is the wheel and the axle or clip that holds it on the dish rack. It is sold individually.

Dishwasher Upper Rack Roller

★★★★★

★★★★★

24 Reviews

This assembly is the wheel and the mount for your upper dishrack. Sold individually. This is an authentic OEM part for use with Whirlpool, KitchenAid, Kenmore and Jenn-Air Dishwashers. The dishrack wheel lets you roll the rack easily on the support rails. This part is sold individually. The most common reason for replacing the dishrack wheel is if it breaks causing the rack to jam. The tool that you will need to replace the dishrack wheel is a flathead screwdriver.

Lower Wheel Assembly

★★★★★

★★★★★

4 Reviews

This lower dishrack roller is less than two inches in diameter. It is made entirely of plastic.

Upper Wheel Assembly

★★★★★

★★★★★

10 Reviews

Upper Rack Wheel

★★★★★

★★★★★

11 Reviews

Sold individually.

Dishwasher Dishrack Roller

★★★★★

★★★★★

4 Reviews

This is a tub wheel assembly for your dishwasher. This assembly, complete with two rollers on a supporting bracket, supports the rack along the upper rail or track to allow the rack to slide smoothly. You may need to replace this if the rollers are broken or jammed. The part is gray in color and is made of plastic. You will need to remove your upper rack to install this replacement tub wheel assembly.

Wheel Assembly

★★★★★

★★★★★

3 Reviews

Sold Individually - 4 required on rack.

Tub Wheel

★★★★★

★★★★★

1 Review

When you order this part it is recommended that you order the gaskets as well - search by model#.