Hedge Trimmer Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Hedge Trimmer Parts
Your Price
$5.95
In Stock
Hedge Trimmer On-off Switch
PartSelect Number PS10170531
Manufacturer Part Number 383994-00
This is a Genuine Manufacturer Sourced replacement part used on a variety of Black and Decker Trimmers/Edgers. This item is Sold Individually. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement.
Your Price
$5.95
In Stock
Hedge Trimmer Spring
PartSelect Number PS10167401
Manufacturer Part Number 243603-00
This spring, often referred to as a recoil spring or spool spring, is sourced from the original manufacturer for use in trimmers. It is located within the spool housing where it is responsible for holding the spool in place. The coils wrap around the trimmer line spool and allow the spool to rotate and release new string. It is normal for the spring to wear down, become corroded, or fall off if it is not properly secured. A faulty compression spring will lower the cutting ability of the trimmer and make it difficult or impossible to feed a new line. To access the faulty spring, you may need to disassembly the spool housing. Remove the spring cap and set it aside. If the cap is damaged or loose, it is recommended to replace it at the same time to prevent the spring from dislodging. Carefully unwind the coil from the spool and pull it out of the spool housing assembly. Position the new spring on the spool and tension it by tightly winding the coils to the desired tension level. Reattach the cap and reassemble the spool housing assembly.
Your Price
$11.95
Special Order
Your Price
$5.95
Special Order
Hedge Trimmer Cord Guard
PartSelect Number PS10153919
Manufacturer Part Number 682503-2
• This cord guard is a genuine Makita replacement part and is sold individually. • Cord guards, also called cord protectors, are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard. • This cord guard will fit cords for the tools listed under the "Compatible Tools" listing. It is not guaranteed to fit any other cords.
Your Price
$15.95
Special Order
Hedge Trimmer Gasoline Filter
PartSelect Number PS10140524
Manufacturer Part Number 163447-0
This is a genuine OEM sourced replacement fuel filter. It is specially manufactured for Makita gas powered handheld lawn and garden equipment. This is an in-tank fuel filter that will help to filter out any contaminants from the fuel that does into the engine. Over time it will get clogged requiring replacement. Replacing this filter is a simple task that should only require pliers. • Remove the air cleaner • Drain the fuel • Remove the fuel cap • Remove the fuel filter • Secure the new filter to the line • Reassemble and test
Your Price
$5.95
Special Order
Hedge Trimmer Compression Spring 4
PartSelect Number PS10143408
Manufacturer Part Number 233101-1
This is an authentic replacement part manufactured for use with Makita pneumatic nailers and jigsaws. The special compression spring is used with different types of equipment and the application of the spring varies depending on the model of equipment. This compression spring is available as an individual replacement part, please see model diagram for part location and usage.
Your Price
$16.95
In Stock
Hedge Trimmer Ball Bearing 608ddw
PartSelect Number PS10141466
Manufacturer Part Number 210005-4
This authentic OEM part is compatible with various handheld power tools made by Makita including jig saws, routers, and sanders. A bearing\\\'s main purpose is to decrease friction between moving parts. They also stabilize parts to keep proper direction and angle. Bearings are high wear items that may need regular replacement. Sold individually. Included in part number 517266-0 Armature Assembly 115V
Your Price
$49.95
Special Order
Your Price
$16.95
Special Order
Hedge Trimmer Air Cleaner Element
PartSelect Number PS9955241
Manufacturer Part Number 443169-1
This is an OEM replacement part for Makita string trimmers. The air filter cleans the air entering and exiting the carburetor. This part is a common wear item, we recommend replacing the air filter periodically. For this repair you will need a pair of pliers and a screwdriver to remove any covers or shrouds. Be sure to unplug the spark plug and boot wire before starting this repair.
Your Price
$5.95
Special Order
Hedge Trimmer Air Cleaner Element
PartSelect Number PS9955243
Manufacturer Part Number 443171-4
This is a genuine OEM replacement part used with the Makita EM2650LH 4-Stroke String Trimmer. The air cleaner element is fitted within the cleaner cover assembly, and is sold individually. The foam material element captures particulates harmful to the motor. A hex key is needed for the repair.
Hedge Trimmer Brands
Popular Hedge Trimmer Models
Below are the most popular Hedge Trimmer models we have. Enter your model number in the search box to find your model.
- 51525 20 Hedgetrimmer
- DCPR320B Pruner
- HH2450 24" Hedge Hog Hedge Trimmer
- HH2450 Hedge Trimmer
- HH2450 24" Hedge Hog Hedge Trimmer
- 8100 Hedge Trimmer
- 8100 Hedge Trimmer
- 8100 Hedge Trimmer
- 8100 Hedge Trimmer
- NPT318 18v Hedge Trimmer
- NPT318 18v Hedge Trimmer
- NPT318 18V 18" Pole Hedge Trimmer
- EH1000 12 AMP Lawn Edger
- GH3000 High Performance 7.5A 14" Electric String Trimmer
- 8118 Deluxe Hedge Trimmer
- 8118 Deluxe Hedge Trimmer
- EH450 Gas Hedge Trimmer
- XNU01 18v Lxt Lithium-Ion Brushless Cordless 20-Inch Articulating Pole Hedge Trimmer Tool Only
- NST2018 18V String Trimmer
- NST2018 18V String Trimmer