Dryer Filters

Dryer Lint Filter

★★★★★

★★★★★

19 Reviews

The Dryer's Lint Filter is used to collect lint during the dryer cycle as it passes through the dryer vent, in order to prevent damage to the machine. This manufacturer-approved part comes in gray, measures around 12 inches wide by 11 inches high, and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. We recommend that you thoroughly clean the lint filter before every load, but even with good maintenance, this hard-working part is often damaged or worn over time. If your dryer isn't drying quickly, the filter may be responsible. The manufacturer has made an authorized substitution to the lint filter. Due to the changes, the manufacturer suggests changing the filter guide, part # MEA4905001 and filter cover, part # MCK66787901. The replacement of the entire component including the filter and surrounding area and guide simply involves the removal of a few screws and screwing the new parts back into place.

Lint Filter

★★★★★

★★★★★

49 Reviews

This is a genuine OEM part that works for some models of GE, and Hotpoint models. This Lint Filter is used for Dryer.

Dryer Lint Filter Assembly

★★★★★

★★★★★

3 Reviews

The lint filter sits in your dryer, and collects loose lint when the machine is operating. Sometimes the lint filter will become clogged or damaged, and in this case, you will need to replace your current lint filter with this part. The frame of this line filter is made of white plastic, and the filter is sold individually. To replace the filter, simply remove the old, damaged filter, and replace it with the new one.

Dryer Lint Filter

★★★★★

★★★★★

9 Reviews

This part has the felt strip and is used to collect lint as it passes through the dryer vent. The lint filter in your dryer is used to collect lint as it passes through the dryer vent. If you notice that your dryer is not providing enough heat, or if it takes too long to dry, you may need to replace the lint filter. You should also replace the lint filter if you notice it is damaged during regular maintenance. Many of our customers have rated this repair as easy. To complete the repair, simply remove the old lint filter and replace it with the new one. You may want to use a flat head screwdriver to remove any residual lint before you install the new filter.

Lint Filter

★★★★★

★★★★★

33 Reviews

This filter collects lint as it passes through the dryer vent.

Lint Filter

★★★★★

★★★★★

24 Reviews

This filter collects lint as it passes through the dryer vent.

Lint Filter

★★★★★

★★★★★

17 Reviews

This is a rectangle shaped lint filter screen used for some gas and electric clothes dryers. The dimensions of this lint filter screen are approximately twelve and a half inches long by seven and three quarter inches wide. This is a white filter and the screen is made of white nylon mesh.

Lint Filter

★★★★★

★★★★★

12 Reviews

This dryer lint screen comes with a handle. This filter collects lint as it passes through the dryer vent.

Lint Filter

★★★★★

★★★★★

39 Reviews

This lint filter screen is slide in styl type of Maytag filter screen. It is most typically used for the 08 and later series of Maytag gas or electric clothes dryers that appear before 1990.

Lint Filter

★★★★★

★★★★★

2 Reviews