Demolition Hammer Parts

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Original Equipment Manufacturer

Why Genuine OEM Matters
Shop By Brand

Popular Demolition Hammer Parts

Your Price
$6.95
  In Stock
Demolition Hammer Cord Guard
PartSelect Number PS10153921
Manufacturer Part Number 682505-8
This cord guard / strain reliever is a genuine Makita replacement part. It covers the final portion of cord before entering the tool, providing extra rigidness and preventing cord damage. Over time these cord guards break down and require replacement. The guard is constructed of heavy duty rubber compound for toughness. This cord guard is compatible with the tools listed below. It is not guaranteed to fit any other power tool models.
Your Price
$14.95
  Special Order
Demolition Hammer Ball Bearing
PartSelect Number PS10141535
Manufacturer Part Number 211066-7
This is a Ball Bearing that is sealed on both sides. This is a genuine Makita replacement part that is sold individually. rnrn • Ball bearings minimize friction between 2 parts in your tool that would otherwise spin and rub against each other. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the balls reduce friction. This reduces wear on the tool and allows it to run smoothly. rn • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.
Your Price
$5.95
  Special Order
Demolition Hammer O Ring 28
PartSelect Number PS10141868
Manufacturer Part Number 213415-4
This is a genuine replacement part designed for use with Makita power tools. This o-ring provides an air-tight seal for the connected parts. Please make sure to check appropriate diagrams for location and use of this item. Over time o-rings will shrink, become brittle and crack allowing for air leaks. At that time they should be replaced. It is made out of rubber and it is sold individually.
Your Price
$26.95
  Special Order
Demolition Hammer Brush Holder Unit
PartSelect Number PS10153125
Manufacturer Part Number 632D00-2
This replacement brush holder unit is a high quality item that is supplied by original equipment manufacturer for use with Makita demolition hammers. Its purpose is to secure carbon brushes around the armature to maintain stable contact. This item is a complete assembly which includes the plastic ring, two metal brush holder with attached lead wires, please note the carbon brushes themselves are sold separately. Keep in mind this brush holder unit is sold individually.
Your Price
$5.95
  Special Order
Demolition Hammer Brush Holder Cap
PartSelect Number PS10153356
Manufacturer Part Number 643700-5
This is a manufacturer sourced replacement part designed for use with Makita power tools. It helps to secure the brush in the housing. This screw-in cap is made of hard plastic and it is sold individually and measures 7-18 HM 1500. To replace it you would need a flat-head screwdriver.
Your Price
$36.95
  Special Order
Demolition Hammer Switch
PartSelect Number PS10153680
Manufacturer Part Number 651922-3
This replacement switch is specially made for use on Makita power tools. Switches are a commonly replaced item in power tools. They play a key role by controlling on/off function of a tool. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. To replace this switch you would need a screwdriver. • First make sure the tools is not plugged in • Remove housing screws • Disconnect wires from the old switch • Remove it from the housing • Place the new switch in the housing • Reconnect wires to it • Reassemble and test the unit
Your Price
$20.95
  In Stock
Demolition Hammer Ball Bearing
PartSelect Number PS10141580
Manufacturer Part Number 211228-7
This authentic replacement part is specially designed for use with Makita power tools. Ball bearings are generally utilized to reduce the friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Unfortunately, over time the components may wear out and begin to fail eventually requiring a replacement. Keep in mind this high-quality item is made of durable metal and is sold individually.
Your Price
$11.95
  In Stock
Demolition Hammer Hammer Grease
PartSelect Number PS10156274
Manufacturer Part Number A-90582
This genuine manufacturer approved hammer grease is sold individually. This petroleum based grease is designed for use with Makita hammers. It helps to lubricate the system allowing for easy movement and protecting parts from usual wear.
Your Price
$42.95
  Special Order
Demolition Hammer Handle
PartSelect Number PS10150668
Manufacturer Part Number 418333-3
This genuine Makita replacement part is designed for use with breaker hammers. It is supplied directly from original equipment manufacturer. Its purpose is to provide user with a stable grip for a stable control of a tool. It also houses the switch. This handle is made out of black plastic and it is sold individually. Replacing this handle is a very simple and quick task. It should only require a hex key/allen wrench. • Make sure the tool is unplugged • Remove the housing screw • Remove the old handle • Secure the new handle with a screw
Your Price
$37.95
  Special Order
Demolition Hammer Switch C3d-15ms (terminal Scre
PartSelect Number PS10153567
Manufacturer Part Number 651131-4
This replacement switch is a genuine item sourced directly from manufacturer. It is an important item that handles on and off function of a unit, allowing user to control the tool. Switches have moving mechanical parts. These parts will eventually break down and fail requiring replacement. Please note the switch is sold individually. Replacing this item is a simple task that should only require a screwdriver. • Remove the housing screws • Remove housing/cover • Disconnect wires from the old switch • Replace old switch with a new one • Reconnect wires • Reassemble and test the unit

Demolition Hammer Brands

Popular Demolition Hammer Models

Below are the most popular Demolition Hammer models we have. Enter your model number in the search box to find your model.

Need Help Finding Your Model Number?
View More