Crosley Range Switches

Videos!

Your Price

$55.93

Infinite Burner Switch

★★★★★

48 Reviews

PartSelect Number PS1145040

Manufacturer Part Number 316436001

This switch controls the stove top 8" surface burner.

Fixes these symptoms

Element will not heat
Little to no heat when broiling
Oven is too hot
See more...

Videos!

Your Price

$89.32

Infinite Burner Switch - Small Element - 240V

★★★★★

5 Reviews

PartSelect Number PS1145039

Manufacturer Part Number 316436000

This switch controls the stove top surface burner.

Fixes these symptoms

Element will not heat
Oven is too hot
Will Not Start
See more...

Videos!

Your Price

$72.86

Range Infinite Burner Switch - 8 Inch

★★★★★

14 Reviews

PartSelect Number PS11744487

Manufacturer Part Number WP7403P239-60

This infinite switch for eight inch range burners is almost three inches long. This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending power to the surface elements. Check the element and terminal block to ensure they are working properly. If they are in working order, check the infinite switch at the control panel for any wires that have overheated, or broken terminals to or from the infinite switch. If the infinite switch is damaged or malfunctioning, it will need to be replaced. Remember to unplug your range before beginning this repair.

Fixes these symptoms

Element will not heat
See more...

Videos!

Your Price

$198.56

Dual surface element switch

★★★★★

1 Review

PartSelect Number PS3504401

Manufacturer Part Number 316238201

This switch controls the stove top surface burner. This surface element control switch is for ranges. Surface element control switch turns the surface element on and off and controls how much heat the element produces. Unplug the range or shut off the house circuit breaker for the range before installing this part.

Fixes these symptoms

Element will not heat
See more...

Your Price

$98.19

Spark Ignition Switch Assembly with Wire Harness

★★★★★

1 Review

PartSelect Number PS3409148

Manufacturer Part Number 316580611

Four switches are included with the assembly.

Fixes these symptoms

Will Not Start
See more...

Your Price

$87.11

Infinite Burner Switch - 8" - 240V

★★★★★

13 Reviews

PartSelect Number PS1529262

Manufacturer Part Number 318293811

This switch controls the stove top surface burner.

Fixes these symptoms

Element will not heat
See more...

Your Price

$110.63

Spark Ignition Switches with Wire Harness

★★★★★

1 Review

PartSelect Number PS3409151

Manufacturer Part Number 316580615

Fixes these symptoms

Will Not Start
See more...

Videos!

Your Price

$115.72

Dual Surface Burner Switch

★★★★★

2 Reviews

PartSelect Number PS11744018

Manufacturer Part Number WP74003122

This part has been updated by the manufacturer. This updated part now has 7 wire terminals instead of 5. The terminals are all labeled, however, the new switch needs to be tested before connecting the pilot lamp wire (P). To test the new switch: 1) Connect the Line Wires (L1 and L2), connect the Load Wires (H1 and H2). 2) Do not connect the pilot lamp (P) wire yet. 3) Reconnect the power to the range and turn on the new switch and one other switch. 4) Connect the leads of a volt meter on L1 of the new switch and P of the other switch you turned on. 5) If the volt meter reads 220V, the L1 and L2 wires on the new switch must be reveresed. 6) Disconnect power, reverse Line Wires if needed and connect the P wire. 7) Reconnect power to the range after reassembly.

Fixes these symptoms