Range Ignitions

Spark Module - Surface Burners

★★★★★

★★★★★

4 Reviews

This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Spark Module

★★★★★

★★★★★

2 Reviews

Spark Ignitor The function of the ignitor in your range is to create the spark that ignites the gas on the burners. If your spark ignition system is not functioning properly, you may need to replace the ignitor. This part is approximately 3 inches in length. The ignitor is located in the rear of the range, so you will need to remove the back panel in order to access it for this repair. Before beginning this repair, be sure that the gas valve for the range is shut off. You should also disconnect the power source to the range before you begin.

SPARK MODULE 6+0 KIT

Spark Module - (4+0) This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Spark Module

★★★★★

★★★★★

1 Review

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Spark Module This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Range Spark Module This spark module is for ranges. Spark module controls the spark for lighting the range's surface burners. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.

Burner Spark Module - 120V 60Hz This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Spark Module This part sends enough current to the igniter to create a spark to the bottom of the burner cap.