Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ken P - June 29, 2020
Verified Purchase
Perfect fit replacement part.
Came with clear instructions and was simple to install.
★★★★★
★★★★★
Jeffery E - November 4, 2020
Verified Purchase
Replacement felt
Received my part, before the delivery date. Fit perfect!
★★★★★
★★★★★
Sheila M - April 17, 2020
Verified Purchase
Dryer Drum Seal
The part was an exact fit. The amazing thing is the expedited speed! The part was ordered around noon and was delivered to a rural Saskatchewan address the following morning by Purolator. Yes, over 4000 miles. When I am in need of parts again I will be sure to use this service again
★★★★★
★★★★★
Craig D - December 24, 2022
Verified Purchase
Amazingly Fast order processing and delivery!
The part was exactly as described and with the help of you tube installed easily.
★★★★★
★★★★★
Joanne B - September 26, 2021
Verified Purchase
Tout est parfait !
Livraison rapide. Feutre de haute qualité. Colle en quantité suffisante.
★★★★★
★★★★★
JIM M - February 7, 2022
Verified Purchase
Drum seals did the job
Once you install the drum seals on both ends, your dryer will run like new. Eliminating sloppy dryer rotations from worn seals. Runs like new.
★★★★★
★★★★★
Lloyd W - October 21, 2022
Verified Purchase
5
When I called was very easy to deal with and the part came fast and it was easy to install very happy with past and service
★★★★★
★★★★★
WILLIAM C - October 14, 2020
Verified Purchase
Kenmore he3 elite dryer
Felt fit perfect and easy to apply. Dryer works like new again. Way more glue supplied than needed, should be smaller tube to drop price but happy with results.
★★★★★
★★★★★
Karen B - August 22, 2022
Verified Purchase
Easy repair with the right part and adhesive.
Quick shipping of the correct part. What’s not to love?
★★★★★
★★★★★
Flora V - April 30, 2019
Verified Purchase
Dryer felt strip.
Repair went smoothly and the part was a perfect fit. It shipped really fast too.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 6 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Rear tub seal failure
I removed the top cover and then the back cover, released the belt tensioner and removed the drive belt. Then slid the tub out of the unit and onto the back dack. Sanded the remnents of the old seal off. Wiped the tub lip with laquer thinner and applied the "fast" drying glue supplied with the kit. Installed the seal and re-assembled the unit...works fine
Other Parts Used:
Jerry from Everett, WA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
67 of 90 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rear dryer drum seal came out
Used my Whirlpool Dryer User Instructions Manual and followed instructions and used the Cabinet Parts page to see the diagrams.
Other Parts Used:
William from Pontiac, MO
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set
17 of 29 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rear seal was damaged and started falling apart.
Had loud squealing prior knew rollers was going. Ordered repair kit that contained new belt , idle pully, and rollers. Knowing I had previously mended the door switch ordered a new to replace it. Unplugged and removed the dryer. Removed front lower panel, then the top and took the screws that held the front panel and door switch. Then I took the belt off and removed the drum. Removed the rear felt and cleaned the drum with fine mesh steel wool applied adehesive waited 5 mins and attached new felt. Then went to work cleaning the inside of the dryer with an air compressor. Rollers were next, poped the retainers and slide old ones off whiped the studs with a rag and put new ones on. Did the same with the belt tensioner pulley that came with the kit. Installed the new door switch and reassembled the dryer. Works great again, quiet etc. Easy fix and glad I ordered the kit.
Took the front part of the dryer out, released tension on the idler pulley, took the drum out, and remove the old drum seal. Make sure you remove the old adhesive with sandpaper or wire brush. Put the new adhesive on the seal, not on the drum. Adhesive is very runny. Seal may need to be stretched to fit the drum. Set the seal on the drum, let sit a few minutes. Put everything back together.
Just like the video, just followed the video Thanks,
Other Parts Used:
Garry from Garland, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Socket set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old. Original heat seal was deteriorated and peeling off. Streaks were getting on the clothes.
Removed the front panel, removed the tub and removed the old seal. Tub seal area was scraped, sanded and wiped with acetone to ensure a clean. Bonding surface. Applied adhesive with and acid brush to get a consistent adhesive layer without getting too much in any one place. Seal was a bit smaller than the tub circumference so it had to be stretch to fit. While the adhesive was curing , I took the time to clean the contact surfaces and vacuum the lint from inside the cabinet. Reinstalled the tub, drive belt and front panel.
Other Parts Used:
Lawrence from ARITON, AL
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
14 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
January 2, 2018
Does this kit do both the front and rear felt seals on the drum, or do you need two kits?
For model number 11076934690
Hi Chris, Thank you for the great question. This kit is just one seal with one tube of adhesive, if you are replacing both front and rear seals you will need to order two kits. Good luck with the repair!
26 people found this helpful.
Was this helpful?
Thank you for voting!
David
December 17, 2019
Does this drum seal also fit the front of the dryer?
For model number WGD9150WW0
Hi David,
Thank you for your question. Yes, this seal is used for both the front and the rear of your dryer. We hope this helps. Thank you and have a great day!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Patricia
January 23, 2020
My dryer seal on the door is not glued down in one small section. Can I use the adhesive glue to glue down loose section or do I have to replace entire seal? Old, used, dryer. Not worth putting a lot of money into.
For model number GEQ9800PW2
Hello Patricia, Thank you for the question. You can use a High Temperature silicone rubber adhesive used in dryers to reattach that section of the seal. We hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Chari
February 19, 2018
Will this help with snagging my clothes. If not - please tell me which part is.
For model number WGD8300SW0
Hello Chari, thank you for your question. The parts you would want to replace to fix this issue would be the Dryer Drum Seal with Adhesive 280114. There are two of these on the unit, one that goes around the front of the drum, and the other goes around the back lip of the drum. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dan
November 10, 2019
I found this seal that came loose inside the drum. Does that mean i need to replace the seal on inside of the back of the drum in that groove and not the outside of the drum?
For model number LEQ8611LG0
Hello Dan, thank you for your question. The felt seal at the back of the drum wraps around the lip. So the one seal seals the inside and outside of the drum. I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Marcel
January 27, 2022
What is the length of this Part # 280114
For model number Part # 280114
Hi Marcel,
Thank you for your question. We do not have the dimensions for this belt, but if you could provide us with the model number from your dryer, we would be happy to verify if this is the correct part for it. We have included a link from our website on where to locate the model number on your dryer. If you could resubmit your question with this information, we would be happy to help you. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Does this fit a Samsung dryer model number DC97-07618A? Thanks for your help.
For model number DC97-07618A
Hello Joe, thank you for writing. The number DC97-07618A is a part number for a Samsung Dryer Gasket. The number PS970088 is for a Whirlpool Dryer Dryer Drum Seal. For us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number, please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
Was this helpful?
Thank you for voting!
Angela
April 18, 2022
Loud screeching noise when turn on. Replaced the rollers, idler pulley and belt, however still screeching. How can I be sure it is the Rear Drum Felt vs the actual motor screeching? I read somewhere that the bearings in the motor can also cause noise.
For model number LER8648PG0
Hello Angela, Thank you for the question. The only way to know for sure is to remove the old felt and check for wear. We also suggest checking the Two-Piece Split Ring Bearing at the front of the drum. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Looking for a replacement dryer door seal for maytag mgd5500fC0.
For model number mgd5500fC0
Hello Ashley, thank you for reaching out. This is the correct dryer drum seal, part number PS970088, for your given model. If you require assistance to place an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
Tina
December 21, 2022
My felt dryer drum seal broke. I know my dryer is old. I'm looking to replace it. What do I order. since this dryer is no longer sold.
For model number 11069822801
Hi Tina, thank you for reaching out. This dryer drum seal, part number PS970088, is listed as compatible with your model. If you require assistance to place an order, please contact customer service. We hope that helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/Dryer-Seals-and-Gaskets.htm"},{"position":2,"name":"280114","title":"280114","url":""}]
