Bellow with Clamp 5303937187

The instructions were good, but putting the spring on was quite difficult. The 3 spacers that came with the boot didn't want to stay in place. Finally I got 2 c clamps, putting a clamp over the spring and rubber spacer, and that did the trick. without the c clamps it would have been extremely difficult to get that spring on. Now it's fixed and no more leaks.

I bought this as much for the instructions as for the part...as I wasn't sure how to get a spring back around the bellows. The instructions were good, however I found that the spring went on best when I had two sets of hands - one set holding the spring in place (with a metal tool to make sure it didn't slip - as the rubber spacer didn't do the job) , and the other hand guiding the spring around the rest of the bellow. Also, when putting the metal clamp back around the water inlet area, I didn't have 3/8" soft copper tube on hand, so I used a couple of other tools to get the metal pieces to wrap around eachother. Also, leaning the washer back on the wall helped make room for my hands to get into the machine and do the work.