Part Location Diagram of WB27T11357 GE FRAME BOARD Assembly
See part 410 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

1-866-883-8386 Monday to Saturday
8am - 8pm EST

customerservice@partselect.ca

FRAME BOARD Assembly WB27T11357

 Fits your PS950EF3ES!

Rated by 1 customer 

A Bit Difficult 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$274.99
  Special Order
 Fits your PS950EF3ES!
PartSelect Number PS8754538
Manufacturer Part Number WB27T11357
Manufactured by GE
Product Description

FRAME BOARD Assembly Specifications

This range frame board assembly helps manage oven functions by supporting the control interface and distributing power to the heating elements. It is commonly used to restore proper operation when the oven fails to heat, controls become unresponsive, or the display does not function correctly.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Wall Oven, Range.
This part works with the following products:
General Electric.
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.3 / 5.0, 1 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The inner burner of the triple burner assembly did not function
The logical first choice for replacement was the triple burner assembly since that is subject to failure for obvious reasons. It turned out that the burner assembly was fine by visual inspection and by virtue of a continuity measurement.

The second choice seemed to be the frame relay board and that turned out to be correct. This was an educated guess since it is the "next" component going backwards, it is responsible for distributing the burner voltages, and that relays can have a reasonably high failure rate. This board could be tested but without schematics that seemed like a lot of effort, so I ordered it on a best guess.

Replacement of the board is not too difficult but does require some attention to detail, and patience is required to be sure that all the wires end up in the right place. Needle nose pliers are really helpful here. Take photographs, make a sketch, and label some of the obscure wires with painter's tape. Took about an hour or so.
Other Parts Used:
  • Robert from TITUSVILLE, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8754538
Manufacturer Part Number: WB27T11357
Brand
Model Number
Description
General Electric
PB920DT1BB
Wall Oven
General Electric
PB920DT2BB
Range - Ge Range/Stove/Oven Pb920dt2bb
General Electric
PB920ST1SS
Wall Oven
General Electric
PB920ST2SS
Wall Oven
General Electric
PB978DT1BB
Wall Oven
General Electric
PB978ST1SS
Wall Oven
General Electric
PB979ST1SS
Wall Oven
General Electric
PCB920ST1SS
Wall Oven
General Electric
PCB920ST2SS
Wall Oven
General Electric
PS920SF1SS
Wall Oven
General Electric
PS920SF2SS
Range - ELECTRIC RANGE
General Electric
PS920SF3SS
Range - ELECTRIC RANGE
General Electric
PS950EF1ES
Range - ELECTRIC RANGE
General Electric
PS950EF3ES
Range - ELECTRIC RANGE
General Electric
PS950SF1SS
Wall Oven - General Electric Range
General Electric
PS950SF2SS
Range - ELECTRIC RANGE
General Electric
PS950SF3SS
Range - ELECTRIC RANGE
General Electric
PS978ST1SS
Range
Customer Service Representative

Get in touch, we're here to help!

1-866-883-8386 Monday to Saturday
8am - 8pm EST

Contact Customer Service