Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Product Description
Radiant Surface Element Specifications
This 12-inch radiant surface element is designed for Frigidaire electric ranges, delivering 2700 watts of power at 240 volts for fast and even heating. Built with a fiber-bonded compressed material, the element provides reliable performance and durability—minor cracks in the outer rings are considered cosmetic and do not affect functionality. Ideal for replacing a burner that no longer heats, this component restores your cooktop’s efficiency and safety. Installation requires disconnecting power at the breaker for protection before positioning the new element securely in place.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Wall Oven.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Electrolux.
Part# 316291200 replaces these:
AP5656837, 318198827, 5304510566
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Vincent L - May 27, 2021
Verified Purchase
Easy Repair with Heating Element Purchased
My appliance is back to normal now.
Rick Y - December 9, 2020
Verified Purchase
Quick shipping and parts
Shipping was quick and the website was very easy to use. Got my parts and the repairs couldn't be simpler and now my stove is back working 100 percent.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Large electric burner (front of oven top) acted intermittenly
First unplug the stove before staring any of this task. loosen and remove three cross tip screws at the upper front of the stove top. You will need a piece of 1x3 wood about 1 1/2 feet long to hold the stove top up (sets at an angle upwards to the front). Loosen remove the bracket holding the burner you wish to replace. Disconnect the electrical wires connected to the burner. The burner is held in place with bracket clamps, remove the clamps from the oven bracket holding it. The burner will have a series if numbers in the back side, remove the brackets one at a time and reinstall on the same number on the new burner. do this to all 3 or four brackets. Install the new burner, install the bracket holding the burner, reconnect the wires. remove the wood brace and all tools. lay the stove top back down on the stove. plug the stove in and test the burner to make sure it works. turn off the burner and install the screws hold the stove to in place. Ta-Da your done. Also you tube has movie shots to give you a much better picture of what I just wrote about...
Other Parts Used:
-
Sheldon from NORTHBOROUGH, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
6 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Renee
July 6, 2021
The burner gets to hot very quickly. Do I need to replace it?
For model number FFEF3048LSG
Hello Renee, Thank you for the question. This is an indicator the switch that controls the element will need to be replaced. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
Related Parts:
Rylan
January 12, 2023
Which element switch do I need to get for the 12 inch radiant burner?
For model number Ffef3054tbr
Hi Rylan,
Thank you for your question. The part number listed under your model number for the infinite switch is PS1145040. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
Todd
March 21, 2025
My front right burner only seems to work on med-high to high (about 6 or higher), wondering what might be the issue and which part I need to replace, thanks.
For model number CFEF3048LSM
Hi Todd,
Thank you for your question. If the burner works only when you select a higher temperature setting, then the switch controlling it, part number PS6012259, is malfunctioning and you will need to replace it. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS6012259
Manufacturer Part Number: 316291200
Manufacturer Part Number: 316291200
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST