Whirlpool W10542314 - Dishwasher Door Gasket with Strike - Black | PartSelect.ca
Dishwasher Door Gasket with Strike - Black – Part Number: W10542314
Dishwasher Door Gasket with Strike - Black – Part Number: W10542314 https://partselectca.azureedge.net/Schematics/Whirlpool/VYZFLWOJ.gif

Dishwasher Door Gasket with Strike - Black

15 Reviews

Your Price

CAD$82.00

PartSelect Number PS5136129
Manufacturer Part Number W10542314
Manufactured by Whirlpool

This one-piece door gasket provides a water tight seal between the tub and the door, to keep water from leaking out of your dishwasher. If your dishwasher is leaking, tears, or there are gaps in your gasket, you may need to replace the door gasket. This black door gasket is made of rubber, includes a new latch strike plate for the door latch, and is a genuine OEM part.

This part works with the following brands: Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Estate, Magic Chef, Inglis, Crosley, Roper.

This part works with the following products: Dishwasher.

This part fixes the following symptoms: Leaking | Not cleaning dishes properly | Door latch failure

Videos For installing this part.

Questions & Answers
Ask our experts a question on this part and we'll respond as soon as we can.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Installation Instructions Provided by PartSelect customers like you.
Average Repair Rating: 4.4 / 5.0, 57 reviews
What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Penny from Manchester, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
W10542314
The door gasket stuck to the door a pulled out of place after every use
Worked the new gasket into the groove with a smooth screwdriver and my fingers. No leaks and it stays in place. Parts Select had the right part and I got it fast
140 of 167 people found this instruction helpful.
Was this instruction helpful to you?
Clifford from Centennial, CO
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Parts Used:
W10542314
Water leaking from front right corner (door) while washer running
The hardest part of this was figuring out the cause of the leak. It only leaked while the washer was running (arms spinning). I thought it might be the air intake seal at the lower part of the door-but that did not look damaged.
I cleaned off the door gasket really good and that slowed the leak - so I figured the gasket was the problem (plus changing the gasket is cheap and it was old anyway).

I pulled the old gasket off (no tools required).
I cleaned the track/slot that the gasket goes into, and the area around it from all the caked-on soap and gunk.
Cleaned off the door edge that seals with the gasket too.
I took the new gasket and folded it in half to find the middle, then started with the middle, putting it into the track (used the center door latch on the frame to know the middle on the washer).
I worked the gasket into the slot just with my fingers. I found that if I pinched the part that goes into the slot with my thumb/finger that helped get it deep into the slot without tools.
I worked around one side, slowly and carefully pushing it into the slot. Did the other side the same way - starting from the middle and working down to the end at the bottom of the washer. Checked the gasket to make sure it was all set in well.
There is an inch or so of the gasket left over at the bottom - I just bent that around the bend so it was not in the way.
84 of 87 people found this instruction helpful.
Was this instruction helpful to you?
Russell from Bellevue, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
W10542314
dishwasher leaked from left side of door
As I pulled out the old rubber gasket I noticed there was a flat side and a curved side, this is how the new one must go. When I put in the new gasket in I just made sure the flat side (faced out) and it really was very simple. It just fits inside a grove, very easy to install. I compared the to parts (old and new) they were exactly the same shape and length.
I was very impressed with the web site navigation and layout. I was able to zoom in on pictures of the part and there were exact measurements of dimensions.
32 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Manuel from Winchester, TN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
W10542314, WPW10158389
water running in to dishwasher when not turned on any cycle. Water running out on to floor
removed bottom panel.disconnected water supply,fill hose,and wiring connector from faulty valve. Replaced in reverse order.
24 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Dale from Oldsmar, FL
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers
Parts Used:
W10542314, WP8268395, W10083957V
Chopper not performing
I noticed some residue in the dishwasher so I decided to clean the chopper screen. I dismantled the screen and spray assemblies and removed the chopper. The chopper was extremely worn and the chopper washer/gasket was missing. I reassembled the parts I removed and as I was placing the screws in the screen assembly I dropped a screw into the impeller well. Since the screws are stainless I was forced to remove the whole motor assembly. Since I had to order a chopper I went ahead and ordered a motor assembly gasket for reassembly. The mistake I made was not ordering a drain valve at the same time for when I removed the valve to clean it the rubber separated. The dishwasher will not function without it. This is where PartsSelect really came through for me. The 2-3 day shipping came in 2 days and the drain valve which was really going to hold me up with standard shipping came the very next day! Way to go PartsSelect! Everything went back together just fine.
16 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Jennifer from Edina, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
W10542314
Poor seal on old gasket caused water to leak during dishwasher operation.
I simply pulled out the old gasket and pushed the new one in with my fingers. I had to trim about an inch off the length with a utility knife. The seal is nice and tight now and we have no more water leakage.
15 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Jennifer from Stockbridge, MA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
W10542314
Old gasket was stretched out and allowed leaking
The replacement of the gasket was simple and required only a flat-head screwdriver to push the rubber into the groove around the opening of the dishwasher. Took only about 15 minutes and the door is a tight fit now. I wish I had replaced the gasket 6 months ago when it first started coming loose when we opened the door to the dishwasher.
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Michael J from Butler, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
W10542314
D/W leaked a puddle of water onto the floor every Load
I removed the old gasket simply by pulling on it. I compared its length to the length of the new gasket, figuring there would be some trimming to do -- there wasn't. The replacement was exactly the same.
I placed a mark on the center of the new gasket, and marked the center of the mounting groove. I aligned the two marks, and pushed the new gasket into the groove, starting at the center, and worked my way out towards the two ends. After getting a majority of the new gasket to seat by hand, I GENTLY used the tip of a slotted screwdriver to ensure that the New Gasket was completely snapped into place.
The fit was perfect, and no more leaks. This repair was so simple, I'm embarressed for putting it off for so long. ;)
9 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Sue from Hudson, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
W10542314
dishwasher leaked
Our Kitchenaid dishwasher was leaking so I called a repair service. I gave the model number and serial number over the phone and explained the problem. I was told the rubber gasket would need to be replaced. When the repairman came 5 days later he told me that the gasket needed to be replaced but he didn't have a new one on his truck. He ordered one and said he would be back in a week to repair the dishwasher. That took 10 minutes at the most. He then gave me a bill for $200.49 ($71.49 for the part and $129 for the labor)that I had to pay right then. I wrote him a check so he would leave and immediately called the repair company to tell them the price was outrageous and that I had never before paid for a repair before the work was done. I was simply told it was their policy. I then told them I was stopping payment on the check - which I did. I checked on-line for the part and found your web-site and the the part I needed for $27.62. I ordered it on a Monday, it arrived on Tuesday and my husband easily installed it that evening. Thank you, thank you, thank you!
8 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Ted from Los Osos, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
W10542314
Door gasket was falling out
I took out the old one and started in the lower left corner and threaded it all around the edge to make sure the placement and length was correct. Then I came back around with a plastic spatula to firmly seat the gasket into the groove. Worked perfectly and havent had any trouble since!
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
15 Reviews
4.8
out of 5
Filter By Rating:
  • 5 Stars
    12
  • 4 Stars
    3
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

Brand
Model Number
Description
Kenmore
66513012K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513012K111
Dishwasher
Kenmore
66513012K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513012K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513013K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513013K111
Dishwasher
Kenmore
66513013K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513013K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513014K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513014K111
Dishwasher
Kenmore
66513014K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513014K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513019K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513019K111
Dishwasher
Kenmore
66513019K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513019K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513023K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513023K111
Dishwasher
Kenmore
66513023K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513023K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513032K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513032K111
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513032K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513032K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513033K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513033K111
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513033K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513033K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513039K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513039K111
Dishwasher - UNDERCOUNTER DISHWASHER