Part Location Diagram of 717000 Whirlpool Pump Tub Gasket
See part 16 in the diagram
Replacing your Whirlpool Dishwasher Pump Tub Gasket
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Pump Tub Gasket

$45.40
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS384950
Manufacturer Part Number 717000
Manufactured by Whirlpool
Part Videos

Replacing your Whirlpool Dishwasher Pump Tub Gasket

Replacing your Whirlpool Dishwasher Pump Tub Gasket
Troubleshooting
This part fixes the following symptoms:
Leaking | Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Estate.
Part# 717000 replaces these:
AP2908993, 3396, 302371, 661633, 717000, 8057506
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.1 / 5.0, 2 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
leaking from tub above motor
Disconnect unit and remove from under counter. remove lower spray arm, tip over dishwasher on it's back, diconnect wires from motor , unscrew drain fitting rotate motor mounts to and lift pump and motor assembly up and out from inside the dishwasher. thoughly clean all parts during pump disassembly( under running water and a toothbrush works well) . Looking at a parts diagram,and using your memory from disassembly replace the new seals and put it all back together, with patience you can do anything and use common sense.
Other Parts Used:
Drain and Wash Impeller Kit Complete Pump Seal Kit Pump Housing Centering Tool
  • Daniel from Sarasota, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
175 of 241 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leak from center of motor unit
Removed dishwasher, take to garage, removed lower rack to gain access to top of motor unit. Used star socket wrench to remove upper screws holding top of unit in. Disconnect wires, drain tube and counter weight. pulled motor unit out from inside dishwasher and placed on bench. Proceeded to disassemble motor. Some things were obvious, others not so. replaced old worn out parts with new, used a little lube (Vaseline) in places to assist in getting seals back in place. Instructions were of little help need to pay close attention when tearing unit apart. Reassembled with new seals, installed motor and re-installed dishwasher...NO LEAKS!! Wife and I happy.
Other Parts Used:
Drain and Wash Impeller Kit
  • TIM from TULALIP, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
13 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Janet
November 5, 2018
What is the diameter of this gasket ps384950 and will it fit my dishwasher?
For model number 8531241
PartSelect logo
Hello Janet, Thank you for the question. The gasket is approximately 7" in diameter. The 8531241 is not coming up a model number sorry. Please see the link below on where to locate the model number we need to verify the parts. Hope this helps, good luck with this repair! https://www.partselect.com/Model-Number-Locator+4+repair.htm

1 person found this helpful.

Was this helpful?
Thank you for voting!
Pat
February 18, 2020
Water not pumping out
For model number KUDM24SEBL1
PartSelect logo
Hello Pat, Thank you for your question. Our sources suggest replacing the drain and wash impeller kit under part PS382822 for your model to fix the draining issues for your dishwasher. We hope this helps.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
;
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS384950
Manufacturer Part Number: 717000
Brand
Model Number
Description
Kenmore
110773811
Dishwasher
Kenmore
110773812
Dishwasher
Kenmore
110773813
Dishwasher
Kenmore
110773881
Dishwasher
Kenmore
110773882
Dishwasher
Kenmore
110773883
Dishwasher
Kenmore
19385
Dishwasher - Kenmore Dishwasher Model 19385 (1988) (19385(1988)) Parts
Kenmore
19585
Dishwasher - Kenmore Dishwasher Model 19585 (1988) (19585(1988)) Parts
Kenmore
19985
Dishwasher - Kenmore Dishwasher Model 19985 (1988) (19985(1988)) Parts
Kenmore
65715755791
Dishwasher - Kenmore Dishwasher Model 657.15755791 (65715755791, 657 15755791) Parts
Kenmore
66513402K900
Dishwasher
Kenmore
66513402K901
Dishwasher
Kenmore
66513409K900
Dishwasher
Kenmore
66513409K901
Dishwasher
Kenmore
66513442K900
Dishwasher
Kenmore
66513442K901
Dishwasher
Kenmore
66513443K900
Dishwasher
Kenmore
66513443K901
Dishwasher
Kenmore
66513444K900
Dishwasher
Kenmore
66513444K901
Dishwasher
Kenmore
66513449K900
Dishwasher
Kenmore
66513449K901
Dishwasher
Kenmore
66513492K600
Dishwasher
Kenmore
66513499K600
Dishwasher
Kenmore
66513592K600
Dishwasher
Kenmore
66513593K600
Dishwasher
Kenmore
66513594K600
Dishwasher
Kenmore
66513599K600
Dishwasher
Kenmore
66513692K600
Dishwasher
Kenmore
66513699K600
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service