The evaporator is found in the back of the freezer. This kit comes with two mounting grommets, two sleeves (not to be used on porcelain models), two #8 mounting screws, and a push-on fan blade.
NOTE: NO LONGER ABLE TO GET BRACKETS. SEE PART INSTRUCTIONS IN SERVICE MATTERS INSTRUCT SHEET# W11500157 11/20KC.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Noisy | Fridge too warm | Freezer section too warm | Fridge and Freezer are too warm
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Vito D - January 25, 2021
Verified Purchase
Freezer evaporator fan
The part was good the repair went well thank you
★★★★★
★★★★★
Gary J - December 23, 2020
Verified Purchase
Worked fine
Packing insufficient and contacts were bent and arms were bent after being mishandled by shipper. Had to straighten every thing out and luckily it worked. Rasped some plastic as fan blades would hit. I wouldn't try to shorten the blades as suggested. Old 1980 fridge
★★★★★
★★★★★
Robin K - January 15, 2019
Verified Purchase
Easy Repair
Part came as illustrated. Followed the instructions from the others (turn off fridge, remove the racks and back panel in the freezer part). Fridge seems to have a second life.
★★★★★
★★★★★
ATTILA R - July 2, 2023
Verified Purchase
easy o repair, its straight forward.
The part came whit no damage, but the motor its self is very lousy, I means the quality of the material is not the same like the old one. Hey, its working so far, and my fridge is cool very well. I got the part very fast is a bonus.
★★★★★
★★★★★
Michael B - September 12, 2022
Verified Purchase
Easy repair
Did not come with bracket as in the picture.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 16 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Unit very noisy and freezer too warm
First I removed the racks in the freezer. The rack supports on the sides lift off without tools. The evaporator cover is at the back of the freezer. 4 phillips head screws. The cover lifts up then forward to expose the evaporator, evaporator fan and duct. The duct is held by 3 hex head screws. The evaporator fan is attached to the duct with a wiring pigtail to a plug. Unplug the fan and remove the duct. The fan is held by 2 hexhead screws. The new fan is put in place and assembly is simply the reverse of disassembly. The unit is quiet and cools properly now. The new part fit perfectly.
Other Parts Used:
Michael from Churchville, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
89 of 95 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Evaporator Fan had quit running
After unplugging the fridge, I removed all the phillips head screws from the evaporator fan housing as well as the back cover and the bottom of the freezer compartment (7) in all. After first removing the bottom cover - then the back cover I could access the evaporator fan unit. This was held in place with two hex-head screws that were easily removed with a nut driver. Then after unplugging the Red, White, and Green wires from the fan I removed it and replaced it with the new one. I did have to break off the two ends of the mounting bracket as described in the instruction sheet since it was too wide. Repeating the above steps in reverse, I had the job done and refridgerator up and running as quiet as could be in less than 15 minutes.
Other Parts Used:
Duane from Piper City, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
25 of 28 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
freezer making a squealing sound
First I Removed the racks. Next 3 hex bolts that secured the ice maker. Undid the ponytail wiring. 3 Phillips screws to remove the metal back. unplugged the Evaporator Fan Motor. Replaced the new one. reassembled.
Other Parts Used:
PAUL from Boiling Springs, SC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
17 of 20 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Squealing evaporator fan
Unplugged the fridge, emptied the freezer, removed the panel screws, removed the fan assembly retaining nuts, slid the spade wire connectors from the tabs, and performed these tasks in reverse to have the fridge up and running like new. I am not an appliance repair person, but I am not intimidated by simple repairs. Your instructions were easy to follow, and the cry in the kitchen of "we need a new refrigerator" was silenced for less than $50.00. Thanks!
Other Parts Used:
JOHN from BEAVER, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
15 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
fan not working
unpluged unit, removed 2 panel screws, removed 4 fan screws, disconnected wires, reassembled
Other Parts Used:
Gary from Erving, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
7 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
fan made lots of noise
unplugged refrig. removed screws on back panel of freezer compartment
removed fan motor cover
removed fan
broke ends off support bracket in accordance with directions
had to pull more of old ground wire out of back of refrigerator to get it to reach ground clip on new fan
plugged all 3 wires into fan motor
replaced covers
every thing works fine now.
part was delivered quite promptly
refrigerator was over 30 years old and a sears model but mfg by whirlpool
Other Parts Used:
jim from bedford, KY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
7 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer making loud whining noise-Fridge not cooling well
Removed the 3 screws in the back of the freezer, pulled back the metal back plate on the freezer. Removed 4 nuts on the plastic housing that holds the fan and pulled the housing down. Disconnected the wires, unscrewed the 2 screws holding the fan to the housing. Replaced old fan motor with new fan motor onto housing just as it was before. Reconnected the wires. And tested the motor. Worked great. Re-assembled everything as it was and it was done.
Other Parts Used:
Dale from Blaine, MN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
7 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Making a god awful racket.
Ok its the garage "adult " Beverage chiller.
Easy fix First I removed the 4 screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires assembly was the reverse. and the beverages never got warm..
Other Parts Used:
Michael from Locust Grove, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fan motor stopped working.
I first unplugged the unit. Secondly I unscrewed the back panel and removed it. Third, I unplugged the fan, unscrewed it, removed it, and replaced it with the new fan motor. I then plugged it to confirm that it worked and then put everything back together.
Other Parts Used:
John from Clifton Heights, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
5 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
nosiy fan operation
most of the time spent on repair was removing the food from freezer compartment other than that removal of a couple screws and disconnecting and reconnecting wires not a huge ordeal
Other Parts Used:
TOM from GRANVILLE, MA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Craig
June 3, 2019
Guys: I am having a unusual problem with evap fan motors. When first installed fan runs normal speed but when temp comes down fan slows to less then half speed and may speed back up for a few mins and slow again. I have tried 2 of them i bought from you, both have the same problem. Have you heard of this before. Any ideas. The blade spins freely.
For model number ET20DKXAN00
Hi Craig, thank you for your question. I would suggest pulling your appliance out and checking that the condenser coils are clean from any dust/debris. After cleaning the coils if they are dirty you still have this issue. I would suggest then looking at your condenser fan and motor. You will want to make sure the fan blades are clean and you will want to make sure the motor is working properly. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ralph
July 9, 2019
Will this fan work on my Whirlpool refridgerator model et19tkxlmr2
For model number ET19TKXLMR2
Hello Ralph, Thank you for the question. ET19TKXLMR2 is showing to be invalid but we do list a ET19TKXLWR2. The Evaporator Fan Motor for this model number is PartSelect Number: PS376645. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Greg
September 4, 2019
Double checking that part #482731 works with Roper rt18dkxal00 fridge, correct?
For model number RT18DKXAL00
Hello Greg, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS376645. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Homer
May 2, 2018
Does the evaporator fan kit 482731 fit my Frigidaire refrigerator?
For model number FRS26KW3AQ3
Hi Homer,
Thank you for your question. It would not unfortunately. I have listed the correct part for your appliance down below. Good luck with your repair.
Hello, will the evaporator Fan Motor kit PS376645 fit A8RXCGFXW03
For model number A8RXCGFXW03
Hello Norman, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11740359. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hello Sheldon, thank you for your question. . Yes, the Fan PS376645 you had chosen is compatible with your model. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Erik
February 17, 2026
Should the evaporator fan spin clockwise pushing air into the freezer away from the coils or counter-clockwise drawing air in from the freezer? The terminals on the original part vs the replacement part were not obviously comparable to tell which terminal to use.
For model number ET18ZKXBW01
Hello Erik, thank you for reaching out. The fan should spin clockwise (facing the shaft) to draw air through the coils and push it into the freezer. Since it is an AC motor, you can connect the power wires to either terminal without affecting rotation or safety. We hope this information helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
