Heating Element 154825001

Hi Ted, Thank you for the question. Please see below for a link to a repair video. The appliance may not be the same but will have the same basic steps. Hope this helps! https://www.youtube.com/watch?v=QYYmKvfj6Xk

Hello John, Thank you for the question. I suggest checking the Heating Element Brass Nut, PartSelect Number PS1524878. The heating element nut is used to connect the heating element to the dishwasher tub. If water is leaking from underneath your dishwasher, you may need to tighten or replace the heating element nut. Thank you for your inquiry, good luck with this repair!

Hi Tom, Thank you for your question. If the dryer is not drying dishes, the heating element fixes the issue the majority of the time, but you should also check the high limit thermostat as well. I hope this helps. Thank you and have a great day!

Hi Stephen, Thank you for your question. For this repair you will need to use a Phillips head screwdriver and a ½ inch wrench. Before beginning any repair, please turn the water off and either unplug the appliance or turn the circuit breaker off. To begin the repair, open the door and remove the lower dishrack. Then remove the lower spray arm by pulling it straight up. Use the screwdriver to unthread the screws securing the dishwasher to the counter and then pull the dishwasher out half-way. Then remove the wires from the heater terminals. Take note of how they are positioned before removing them. Then, with the half inch wrench, unscrew the mounting nuts securing the terminals. Then pull out the old heater terminals and release the heater terminals from the retaining clips. Install the new heater element terminals into the openings. There should be 2 white dots on the heating element. Where the white dots are positioned is where they slide into to the retaining clips. Once the element has been placed into the clips, push the terminals down and reinstall and tighten the mounting nuts with the wrench. Place the wires back onto the terminals and slide the dishwasher back into the counter. Secure the dishwasher to the counter with the 2 screws. Reinstall the lower spray arm and push it down to lock it in. Place the lower rack back into the dishwasher and restore power and water to the dishwasher. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!

Hi S, thank you for reaching out. In order to clean the heating element empty your dishwasher of all the dishes and utensils. Pour vinegar directly over the heating element and wait for 5 minutes for it to start its acidic action and then scrub it with a brush. Start a cycle of your dishwasher at the hottest settings. Finally, to get the odor out of your dishwasher, use a solution of dish soap and water to clean the inside of your dishwasher and rinse with warm water. We hope that helps!

Hello Jorge, thank you for your question. If the heater and the thermostat have been tested and have continuity the issue could be with the main board under the unit which controls the functions, which is PartSelect Number: PS2342475. I hope this helps.

Hello Brenda, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS1524878. Thank you for your inquiry, good luck with this repair!

Hi Gladys, thank you for your question. Unfortunately we do not have the wattage information. However this part is photographed on a 1 inch grid background to get an approximate size of the part. This part is 16" wide. Good luck with your repair.