Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
HARNESS,SINGLE EAD54838701
Fits your DCG1218!
$36.30
Special Order
Fits your DCG1218!
PartSelect Number
PS3620126
Manufacturer Part Number
EAD54838701
Manufactured by
LG
Troubleshooting
This part works with the following products:
Air Conditioner.
This part works with the following products:
LG.
Part# EAD54838701 replaces these:
6871A20096R
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Remote control not operating system.
You need to remove grill assemble from cassette.
1. Remove the 4 corner cover (slide horizontal ). Then remove the 4 screw holding the grill in place.
2. Have a helper to hold grill close to the ceiling so you don't have to undo all the wiring.
3. Remove the cover off the main control board.
4. There are screws under the weather stripping. remove them this allows you to remove the foam duct insulation.
5. You can now see the PCB ASSEMBLE,DISPLAY. Unclip it and follow the wiring harness which go into the main control board. Unplug and remove.
6. Install the new assemble in a reverse order.
1. Remove the 4 corner cover (slide horizontal ). Then remove the 4 screw holding the grill in place.
2. Have a helper to hold grill close to the ceiling so you don't have to undo all the wiring.
3. Remove the cover off the main control board.
4. There are screws under the weather stripping. remove them this allows you to remove the foam duct insulation.
5. You can now see the PCB ASSEMBLE,DISPLAY. Unclip it and follow the wiring harness which go into the main control board. Unplug and remove.
6. Install the new assemble in a reverse order.
Other Parts Used:
-
Patrick from LITTLEFIELD, AZ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST