This pipe holder secures tubing or piping in place to maintain proper alignment and routing. Its durable construction supports stable installation and reliable operation.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Refrigerator, Freezer.
This part works with the following products:
LG, Kenmore.
Questions and Answers
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gordon
August 4, 2023
Does this bar come with a foam rubber gasket
For model number LFC25776SW/03
Hello Gordon, thank you for the query. According to our research, the pipe holder, part number PS3535430, does not come with a foam rubber gasket. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Herb
February 13, 2025
Does Part # PS3535430 come with a seal or gasket
For model number LFCC22426S
Hi Herb, Thank you for reaching out. Researching the model, it does not show a seal or gasket is required for the Pipe Holder. Let us know if you have further questions!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
January 9, 2026
Model LFCC22426/01 refrigerator. Replaced part number PS 3535430 pipe holder because it was broken and leaking. Two weeks after replacing it, it started to leak again. Notice that the foam pad is not worn evenly and the part that goes into the hole is wet. Is the foam pad and the pad that goes into the hole one part? It seems that is the problem. Is there a PN or is there something else to repair it. Also the screws that hold the pipe holder cannot be tightened enough.
For model number LFCC22426S
Hello Mike, thank you for reaching out. According to our research, the foam pad and the pad that goes into the hole are parts of the water tube that comes with the water inlet valve, part number PS12706531. You might need to replace it to fix the issue. The screws not tightening indicates the mounting holes are likely stripped. The pipe holder only supports the tube and does not seal water, so tightening it further will not stop the leak. Using slightly longer screws or anchors can secure the holder, but the leak is resolved by properly seating or replacing the water tube. We hope this information helps!
Hello Ron, thank you for contacting us. Based on the description that you have provided, we would recommend replacing the hose connector, part number PS3535430, to fix the issue. We hope this solves your problem!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Hose or Tube","title":"Hose or Tube","url":"/Refrigerator-Hoses-and-Tubes.htm"},{"position":2,"name":"MEG61879201","title":"MEG61879201","url":""}]
