Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Product Description
Water Level Switch Specifications
This water level switch senses the level of water in the inner tub.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Washer Water Level Switch
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Kenmore, Amana, Roper.
Part# W10339334 replaces these:
AP4568374, 1636739, 8577845, W10213199, W10339330
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Daniel P - January 1, 2024
Verified Purchase
This is the part that i needed
The water level switch come with the air pressure hose included and also with the hose clip to keep it attached to the washing basket. It was an easy fix on my washing machine. In my case, the only extra job was to adjust and increase a little the water level by turning the water level adjustment screw that is on the back of the water level switch untill the water level is just over the last upper holes in the basket.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water level switch broke off in the knob.
Unplugged the washer from the power. Turned off the hot and cold water. Took two screws off the back and raised up the upper cover. Took the power cables and water tube loose from the water level switch. Removed the switch. Put the new switch in. Removed two metal clips at the top of the washer and leaned the washer body forward. Replaced the tube with a new one. Put the washer body back in place and put the clips back in. Attached the tube to the new switch along with the power cables. Let the top cover back down and put in the two screws. Slid the new knob in place. Plugged up the washer to the power. Turned the hot and cold water back on. And commenced washing laundry.
Other Parts Used:
-
Larry from Hyden, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
11 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original water level switch broke
It was really easy. Only needed 2 tools. Took off the back of the control panel with a nutdriver and phillips head screw driver (4 screws). Removed the old switch with phillips head screw driver (2 screws) & pulled off the nob & tube. Installed the new switch, reconnected the tube and nob. Replace the back and reset the control panel and my wife was all set to go with the laundry. One last note, I had to pull the machine away from the wall a couple of feet to reach the back. After putting it back together I pushed the machine back into place. Remember to re-level the machine by pulling the back up about a foot or so and placing back down. The self leveling mechanism underneath will level the machine automatically for you.
Other Parts Used:
-
Timmothy from VALHALLA, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
CONTROL BUTTON SHAFT BROKEN OFF
FOLLOWED YOUR VIDEO
RELEASED CLIPS ON CONTROL PANEL - ROTATED CONTROL PANEL TO THE REAR - UNPLUGGED WIRING & HOSE - TURNED CONTROL COUNTER CLOCKWISE & LIFTED OUT - REPLACED WITH NEW CONTROL IN REVERSE ORDER
RELEASED CLIPS ON CONTROL PANEL - ROTATED CONTROL PANEL TO THE REAR - UNPLUGGED WIRING & HOSE - TURNED CONTROL COUNTER CLOCKWISE & LIFTED OUT - REPLACED WITH NEW CONTROL IN REVERSE ORDER
Other Parts Used:
-
JAMES W from CULLMAN, AL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3408163
Manufacturer Part Number: W10339334
Manufacturer Part Number: W10339334
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST