Gas Valve Kit 279923

Hello Philip, thank you for your question. Typically, if you smell gas, that's a sign that your Igniter PS334180 is going bad. We have a video for you to access. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

Hello Dennis, Thank you for the question. I suggest checking the Internal-Bias Internal-Bias, PartSelect Number PS11741405. The thermostat can be tested. Set your multimeter to the R X 1 setting. Take each of your meter's probes and touch one to each terminal. You are testing for continuity, and you should receive a reading of either zero or infinity. At room temperature, testing the thermostat should produce a reading of zero. But if a thermostat is tested when it is heated to its limit, a reading of infinity should be produced. We strongly recommend that you test your thermostat at room temperature. If the test you conduct with your thermostat does not produce these results, then you should replace the component. I hope this helps.

Hello Chris and thank you for writing. It certainly sounds like a faulty thermal fuse PS11741460 and /or coils PS334310, you should check for signs of damage, and replace it if needed. It is recommended to replace both parts at the same time. We hope this helps. Please contact us anytime.

Hello Thivakaran, Thank you for the question. Locate the M Series New Style Coil Kit and test them using a multimeter, if you get a resistance reading on the meter of 1000-2000 ohms, the coil is bad and must be replaced. We hope this helps!