GE/GE_Thumb/00000088i01.gif
See part 843 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Door Gasket

★★★★★
★★★★★
1 Review
$42.52   Special Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS263965
Manufacturer Part Number WD8X229
Manufactured by GE
Product Description

Door Gasket Specifications

This dishwasher door gasket is compatible with those models having a two ear housing and a square spacer. It's gray and it creates a water tight seal around your dishwasher's door.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint, Kenmore, Amana.
Part# WD8X229 replaces these:
AP2038861, 2019, WD8X229, WD08M0013, WD08X0193, WD08X0214, WD08X0216, WD08X0220, WD08X0223, WD08X0229, WD8M13, WD8X193, WD8X214, WD8X216, WD8X220, WD8X223
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

3 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Richard
    April 20, 2018
    The dishwasher is leaking from what appears to be at the bottom of the door. When i look at the door seal there is about a 5" gap between the seal at the middle of the door - the seal does not go across the entire bottom of the door. Is that normal? When i remove the kick plate below the door the foam strip is wet and i see no other sign of leakage. So my question is "is the door seal suppose to be continuous along the bottom of the door?"
    For model number GSD650X-68BA
    Hello Richard, Thank you for your inquiry.The door gasket WD8X229 will go around the top and sides of the door and end at the sides at towards the bottom. It does not install on the bottom of the door. The bottom of the door completes the rest of the seal needed to keep water in. Hope this helps!

    6 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Jane
    March 21, 2018
    This model number is not listed on your site. It is a little older model dishwasher. I needed a seal for the door. Would the wd8x229 GE part ( ps263965) work on this particular model?Thanks!
    For model number GSC3400Z00BL
    Hello Jane, thank you for your question! I was able to find your model information in another database. The manufacturer recommends replacing the door gasket with Manufacturer Part Number WD08X10016. Good luck with your repair!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Rik
    October 14, 2019
    Hi: My dishwasher is leaking at the bottom of the door. Is it most likely due to the condition of the corner baffles or the gasket?
    For model number GSD500L-02AW
    Hello Rik, thank you for your question. We would recommend replacing the baffles and the gaskets together. Replacing the three items at the same time is recommended by the manufacturer. The part numbers are Corner Tub Baffle - Lower Right Part Number: WD8X227, Corner Tub Baffle - Lower Left Part Number: WD8X228, Door Gasket Part Number: WD8X229. I hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 3.9 / 5.0, 19 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Dishwasher leaking at door seal.
      Removed door seal and corner baffles by hand (no tools required). Replaced same parts with minor tweaking to get proper alignment of new seal. Strongly recommended: remove dishwasher trays in order to get head and shoulders inside for proper view of seal placement.
      • Kenneth from Goleta, CA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Parts Used:
        WD8X229, WD8X228, WD8X227
      128 of 137 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Water leak in the front when the machine is used.
      Shut the power off. Removed 7 screws off from the back of the front door. Lifted the panel carefully from the door and rested on the front panel. Removed the old door gasket and Gasket insert and cleaned the area.
      Soaked the new door Gasket in warm water for few minute before use.
      Inserted the door Gasket starting from the top in the groves and pressed it down. It was little difficult to see at the back to insert the Gasket insert. Used small pocket mirror to insert the Gasket in place. Put back all the screws. Worked out good. No more leak.
      • Rajagopal from Califon, NJ
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WD8X229, WD08X10015
      78 of 86 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Dishwasher was working OK but old door seals were leaking.
      Pulled out the old seals paying particular attention to their orientation. Cleaned the mounting areas and installed the new seals by hand.

      This unit is more than 20 years old and is working just fine. Part Select made it easy to find what I needed and the parts arrived in two days.
      18 of 24 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Small leak below lower right corner of door
      I took the inner door panel off as described by others on this website, cleaned out all the gunk left by 27 yrs of use, and replaced the door gasket and tub baffles. A Phillips-head screwdriver was required to remove the door panel, but no tools were required to replace any of the parts I ordered. I didn't find it necessary to soak the door gasket in warm water as it was pretty flexible right out of the package. I recommend stretching the gasket slightly while pressing it into the groove, particularly around corners, or it will end up being too short at the end. The rinse aid tank had also been leaking Jet-Dry for a long time, so I cleaned that mess up as well and tried to replace the tank. Unfortunately, the new tank did not fit my model of dishwasher even though this website and GE's stated that it did. The shaft on the tank that pokes through the inner door panel to the inside of the dishwasher was too short because >2 mm of it was taken up by a thick rubber washer and a hard plastic collar (fused to the shaft to hold the washer in place) that had not been part of my original rinse aid tank. PartSelect was very good about refunding me for the incorrectly identified rinse aid tank and stated that they would contact GE about correcting this error on their website as well. I therefore cleaned up my original rinse aid tank, rinsing out all Jet-Dry residue inside it, and put it back into the inner door panel. I researched this part and found that GE has redesigned it twice since my dishwasher was manufactured in 1985 -- my original part is no longer available anywhere. So, I will just not use Jet-Dry and will maybe upgrade to a dishwasher powder that includes rinse agent (e.g., Cascade Complete). Replacing the gasket and tub baffles and cleaning up my original rinse aid tank stopped the leak for less than the cost of a repairman's service call and diagnosis fees -- it would have cost me 3X more if he had provided the parts and done the repairs! Replacing my dishwasher was out of the question as they do not make them like they used to (i.e., no microchips or motherboards to fail in a few years) -- this is the first problem I've had with my dishwasher in 27 years! As a side note, I also learned from my research that my front door panel insert is reversible. I was able to remove a side trim piece, slide out the panel, and turn it over so the color is now white rather than the outdated almond. It's like I have a brand new dishwasher that is ready to go for another 27 years.
      • Kristina from Springfield, VA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Screw drivers
      17 of 22 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Seals and gasket corroded
      First I removed the old gasket and seals. I replaced the seals and had difficulty getting the gasket to seal at the bottom of the door. I had to remove the seven door screws and was able to manipulate the gasket. Do not lift the inside door cover too far, as the latch may become disengaged, thus creating another problem to repair. I did this repair myself (female).
      • Bonnie from Broomfield, CO
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WD8X229, WD8X228, WD8X227
      13 of 16 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      A small leak from lower R door
      The hardest part was figuring out how to disassemble the door to replace the baffles and door gasket. No pictures or clues on the internet or my owners manual. I figured it out myself and the rest was a piece of cake. When the 7 screws were removed, the door liner lifted right out and new parts fit right in.
      • Louise from Manhattan Beach, CA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WD8X229, WD8X228, WD8X227
      12 of 17 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Water leak at lower right corner of door.
      Replaced door seal, right and left corner seals. Piece of cake. A five minute job.

      Thanks
      • Patrick from Canyon Country, CA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Parts Used:
        WD8X229, WD8X228, WD8X227
      9 of 13 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Door Leaking
      On the GE Pot Scrubber 1120 model you do not even need tools to replace the parts that we replaced. We just pulled the corner baffles out and cleaned the corners before placing the new baffles in. For the door gasket, we just pulled the old gasket out and put the new one in the track that the old one came out of. We didn't have to take any door screws out to replace the gasket at all. It was very easy to do and no more leaks. You will have to push against the door to get it closed tightly the first time you use it since the new gasket has not been flattened by use. I ordered the gasket insert and used it since we had it but for this model we didn't really need it. I would suggest not ordering one for this model.
      6 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Old door gasket had become hardened and would not seal properly.
      Pulled the lower left side end of the old door gasket out of door gasket retaining slot and slowly and evenly continued to work my way around the door pulling the door gasket out of the retaining slot until I reached the end. I installed the new gasket into retaining the retaining slot beginning on lower left side and then slowly and evenly working my way around the door inserting the new gasket into the retaining slot. I was careful to make sure the two cutout portions of the new gasket's retaining edge were correctly positioned in the lower corners of the door.
      • Bill from NEWPORT NEWS, VA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Pliers
      • Parts Used:
        WD8X229
      3 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Leaking out the right corner of dishwasher
      Door seal was brittle and flat.
      Not a hard job to do just having to keep making sure the seal did not pop out on the bottom corners of the door. The seal would tare easy so have to be careful. Before you remove the old seal on the bottom of door there is a 4 inch space between the ends of the seal. Mark the spot with marker so you know where to start placing the new seal.
      Baffles were orginaly put in place with plummer putty, do not use this. Get GE clear seal is the best will hold forever but will come loose with a good tug. easy to clean out when replacing baffles again. Do not use any sealent when inserting the door seal just push into opening. Make sure you support the door when pushing down on door to put the seal in the slots.
      The hardest part is the bottom corners the seal tends to slip out I found that if I streached the seal over the openings and continued on and come back to the corners it was easier to make the seal slip in.
      • Larry from Spring, TX
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        30 - 60 mins
      • Parts Used:
        WD8X229, WD8X228, WD8X227
      3 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      1 Review
      4.0
      Filter By Rating:
      • 5 Stars
        0
      • 4 Stars
        1
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS263965
          Manufacturer Part Number: WD8X229
          Brand
          Model Number
          Description
          General Electric
          1200L02
          Dishwasher - DISHWASHER
          Kenmore
          18385
          Dishwasher - DISHWASHER
          General Electric
          3000B10
          Dishwasher - DISHWASHER
          General Electric
          3000W10
          Dishwasher - DISHWASHER
          Kenmore
          361402891
          Dishwasher - Kenmore Dishwasher Model 36.1402891 (361402891, 36 1402891) Parts
          Kenmore
          3631401190
          Dishwasher
          Kenmore
          3631401191
          Dishwasher
          Kenmore
          3631401590
          Dishwasher
          Kenmore
          3631401591
          Dishwasher
          Kenmore
          3631401592
          Dishwasher
          Kenmore
          3631401890
          Dishwasher
          Kenmore
          3631401891
          Dishwasher
          Kenmore
          3631401892
          Dishwasher
          Kenmore
          3631402190
          Dishwasher
          Kenmore
          3631402191
          Dishwasher
          Kenmore
          3631402192
          Dishwasher
          Kenmore
          3631402590
          Dishwasher
          Kenmore
          3631402591
          Dishwasher
          Kenmore
          3631402592
          Dishwasher
          Kenmore
          3631402890
          Dishwasher
          Kenmore
          3631402891
          Dishwasher
          Kenmore
          3631402892
          Dishwasher
          Kenmore
          3631404193
          Dishwasher
          Kenmore
          3631404194
          Dishwasher
          Kenmore
          3631404196
          Dishwasher
          Kenmore
          3631404197
          Dishwasher
          Kenmore
          3631404593
          Dishwasher
          Kenmore
          3631404594
          Dishwasher
          Kenmore
          3631404595
          Dishwasher
          Kenmore
          3631404596
          Dishwasher

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service