Part Location Diagram of WD13X10003 GE Door Latch Kit
See part 802 in the diagram
Replacing your General Electric Dishwasher Door Latch Kit
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Door Latch Kit

★★★★★
★★★★★
2 Reviews
$59.37
  Special Order
PartSelect Number PS259293
Manufacturer Part Number WD13X10003
Manufactured by GE
Product Description

Door Latch Kit Specifications

This door latch kit is used for dishwashers.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Dishwasher Door Latch Kit

Replacing your General Electric Dishwasher Door Latch Kit
Troubleshooting
This part fixes the following symptoms:
Door latch failure | Will Not Start | Door won’t close
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WD13X10003 replaces these:
AP2039296, 771030
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 4 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Door latch broke
Removed the old one from its slot and slid the new one into it.
No instructions needed.
Other Parts Used:
  • Barbara from TAMPA, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Latch was broken so dishwasher wouldn't run
I watched several YouTube videos on how to make the repair. It looked very easy but sometimes professionals, because they've done it before, don't point out small tips that would help a DIY homeowner. The latch goes easily into the inner door slot but there's nothing to hold it there. The videos show the inner and outer door being closed together without showing that you have to hold the latch in place while bringing the outer door up to meet the inner door. Any movement of the inner door makes the latch fall out. So I would say it took me 5 times longer to do this repair than it would if I was doing it again.
Other Parts Used:
  • Rhonda from CANTON, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door latch broken
I watched the convenient video and saved an old machine that I've grown to love. Plus I didn't have to pay a repair service or have to buy a new machine.
Thanks GE,
T. Dunn
Other Parts Used:
  • Thomas from COLUMBUS, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher would go on and off during operation
Took screws out of door panel to get to the latch and replaced old latch with new one. Super easy
Other Parts Used:
  • Kenny from CARUTHERSVLLE, MO
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

4 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Andrea
November 10, 2017
How do you install this part?
PartSelect logo
Hi Andrea, Thank you for your question. First unplug your appliance. Then unscrew the knob from underneath the latch. You will open your door and remove the screws around the door to separate the inner and outer door panels. The two screws at the bottom of your door are different so make sure to remember which one goes where. Lift your door back into a closed position but not entirely closing the door. Gently pull down the front panel of your door. Now open the latch half way and then press on the release on the back of the part to remove the old latch assembly from your door. Then reverse this process to put your machine back together. Good luck with your repair.

9 people found this helpful.

Was this helpful?
Thank you for voting!
Chi
November 20, 2017
I purchased my house about over 10 years .I never use dishwasher .Now i try to use it but its wont start please tell me whats im going to do .Or some thing wrong with the Dishwasher ? I already check the electrical this connect same line wwith disposer....the disposer working very good that mean not electric poblem.
For model number GSD2030F00WW
PartSelect logo
Hi Chi, Thank you for your question. There are a couple of parts that you will want to check on your appliance. I would suggest checking your interlock switch, your door latch, and your motor. I hope that helps. Good luck with your repair.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Barbara
August 8, 2023
Will this latch work on this model
For model number Gsm2260v00ss
PartSelect logo
Hello Barbara, thank you for contacting us. The door latch kit, part number PS259293, you have mentioned is compatible with your model. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Bill
September 29, 2021
My dishwasher starts as soon as the dial moves to the run position. The latch does not respond to either the or stop the dish washer. The dishwasher will keep running if you move the latch to temporally stop the cycle to put in another item to be washed
For model number GSD2200G00WW
PartSelect logo
Hello Bill, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: the door latch kit, the interlock switch, the timer, and the push button switch kit. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We also recommend checking the wiring for any visible damage. We hope this helps.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
;
Model Cross Reference
This part works with the following models:
PartSelect Number: PS259293
Manufacturer Part Number: WD13X10003
Brand
Model Number
Description
Kenmore
36314031000
Dishwasher
Kenmore
36314031001
Dishwasher
Kenmore
36314032000
Dishwasher
Kenmore
36314032001
Dishwasher
Kenmore
36314038000
Dishwasher
Kenmore
36314038001
Dishwasher
Kenmore
36314039000
Dishwasher
Kenmore
36314039001
Dishwasher
Kenmore
36314061791
Dishwasher
Kenmore
36314071791
Dishwasher
Kenmore
36314071792
Dishwasher
Kenmore
36314071793
Dishwasher
Kenmore
36314071794
Dishwasher
Kenmore
36314072791
Dishwasher
Kenmore
36314072792
Dishwasher
Kenmore
36314072793
Dishwasher
Kenmore
36314072794
Dishwasher
Kenmore
36314072795
Dishwasher
Kenmore
36314074791
Dishwasher
Kenmore
36314074792
Dishwasher
Kenmore
36314074793
Dishwasher
Kenmore
36314074794
Dishwasher
Kenmore
36314075791
Dishwasher
Kenmore
36314075792
Dishwasher
Kenmore
36314075793
Dishwasher
Kenmore
36314075794
Dishwasher
Kenmore
36314081990
Dishwasher
General Electric
36314081991
Dishwasher - DISHWASHER
Kenmore
36314081992
Dishwasher
Kenmore
36314081993
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service