Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Turntable Motor WB26X172
Fits your HTC0716W01!
$134.05
Special Order
Fits your HTC0716W01!
PartSelect Number
PS237905
Manufacturer Part Number
WB26X172
Manufactured by
GE
Product Description
Turntable Motor Specifications
This motor rotates the glass turntable in the microwave.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Microwave, Range.
This part works with the following products:
General Electric.
Part# WB26X172 replaces these:
AP2024904, 254053
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob
October 28, 2017
I am trying to replace turntable motor for this microwave/oven combo. To reach into it, i need to take out microwave trim assembly. I took out screw of trim i-brow but the trim assembly still can't come out. Looks like there is a bracket (28) support trim that holds the trim assembly. I think if i can take out the trim assembly then i can reach out to the turntable motor. How to remove the trim assembly?
For model number JTP90SM2SS
Hi Bob,
Thank you for your inquiry. Before you begin any repair please unplug the appliance from the electrical outlet or turn the circuit breaker off. To gain access to the turntable motor you will need drop the bottom panel down. There are several mounting screws along the bottom of the microwave that you will have to remove. With the screws removed lower the bottom panel and you will have access to the turntable motor. Remove the wires from the turntable motor. Take a Torx bit and remove the turntable motor. Remove the spacer from the old motor so you can put it on the new motor. Properly seat the new motor into position and secure it with the screws. Reattach the wires and secure the lower panel with the screws. Restore power to the microwave and it should be ready for use. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
SANDRA
October 24, 2024
The turntable in my microwave just keeps mocing even when not in use so I am assuming this turntable motor needs to be replaced?
For model number PT970SR3SS
Hello Sandra, Thank you for your inquiry. Researching your model, the issue could be with the turntable motor or the door switches. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS237905
Manufacturer Part Number: WB26X172
Manufacturer Part Number: WB26X172
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST