Part Location Diagram of 241885001 Frigidaire Dispenser Crusher Housing
See part 13 in the diagram
Replacing your Frigidaire Refrigerator Dispenser Crusher Housing
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Dispenser Crusher Housing

★★★★★
★★★★★
5 Reviews
$85.61
  In Stock
PartSelect Number PS2378689
Manufacturer Part Number 241885001
Manufactured by Frigidaire
Product Description

Dispenser Crusher Housing Specifications

This part may look different or be a different color than the original, but will fit and function the same as the original part.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Frigidaire Refrigerator Dispenser Crusher Housing

Replacing your Frigidaire Refrigerator Dispenser Crusher Housing
Troubleshooting
This part fixes the following symptoms:
Ice maker won’t dispense ice | Ice maker dispenses too much ice | Ice maker not making ice | Ice maker dispenses too little ice
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Electrolux, Crosley.
Part# 241885001 replaces these:
AP4511889, 1557825, 241885001, 241685301, 241685601, 5304404358, 5304404359, 7241685301, 7241685601
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
4.6
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    2
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.7 / 5.0, 16 reviews. What's this?
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The plasticdrum was broken and would no longer crush or feed the ice through the door
removed screws,removed broken parts and installed new parts.
Other Parts Used:
Ice Container/Bucket Washer E-Ring Ice Dispenser Drum Auger Nut
  • Lawrence from Wichita, KS
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
146 of 220 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Crusher Broke. Plastic in Ice Tray
Removed 4 screws holding face plate onto ice bucket. Removed the 3 screws holding the ice crusher housing. Noted postion and rotation of teh s;ring loaded ice selecting rod. Removed broken crusher housing. Reveresed process for installion. Took for test drive. Operational...
Other Parts Used:
  • Ronald from Dickson, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
35 of 51 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original gate broke at the swivel point
I removed the old gate by using a flat head screw driver to pry open mouth. I then removed 2 bolts that held on the cage that hols the ice crushing blades. Then I inserted the new gate and used a screw driver to pry the mouth open again (it was more difficult to insert than remove). I then popped in the new gate and re-assembled the cage. It worked on the first shot with no problems!

This is the 3rd time I have attemped and successfully repaired major home appliances myself after the warrenty ran out. I'm sure I could buy a new appliance for the money I saved.
Other Parts Used:
  • Charles from New Orleans, LA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
15 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
housing-crusher was broken
removed ice maker box and disassembled crusher unit on front of box and installed new housing.
Other Parts Used:
  • Bob from Milton, WV
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
12 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Part broke though normal use
Called "local" repair warehouse and ordered part. They shipped the wrong part. Went on-line to Part Select and got the right part.
Other Parts Used:
  • Hugh from Berthoud, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
7 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
crusher housing cracked
Removed ice tray, disassembled ice tray assembly and crusher housing making sure to note the spring location, spring etc, installed new plastic housing making sure to reinstall the spring properly and the fixed crusher blade into the notch cutout., reassembled ice tray.
Other Parts Used:
  • Adam from Clayton, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice crusher selection door broken
Removed ice bucket from freezer. Remove ice. Remove 2 phillips head screws from the inside front of ice bucket, and 2 fromt the bottom front to remove the front cover. Remove the E clip and washer from ice crusher shaft. Remove 4, 1/4” head screws from ice crusher housing. Unclip the selector shaft from crusher door paying attention to position.Slide housing off of shaft and discard. Install new housing over shaft and install the 4 screws. Install selector shaft into door. Install the E clip and washer onto shaft. Install front housing with the 4 screws previously removed. Refill bucket with ice and install bucket back into freezing taking care to orient the ice screw shaft into the cog in the back of the freezer as well as the door selection shaft. Test operation.
Other Parts Used:
  • shawn from CORTEZ, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Crusher Houseing cracked broke into pieces
Remove ice drawer ,Removed front of drawer 4 screws ,Removed broken crusher 3 screws Ordered new parts reassembled replaced fix blade spacer that was broken and blade cover housing reattached front of drawer !
Other Parts Used:
SPACER-FIXED BLADES
  • Curtis from ROCK HILL, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The ice crushing housing was broken.
The repair went easily after watching the video, took me less than an hour to complete the repair.
Other Parts Used:
  • Les from LIVERMORE, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Director Door Broken In Half
I was able to replace the housing by only removing the front cover, the e-ring and washer and the 3 hex-head screws. I was able to work the old housing around to get the actuator arm off and then get it properly inserted into the new housing. Attach the new housing, IMPORTANT: make sure you get the fixed-blades and spacer assembly in the slot of the housing that holds them in place, replace the e-ring and washer, check that the actuator arm operates the door properly and replace the front cover. The videos can be helpful but these shortcuts will save some time.
Other Parts Used:
  • Cloid from HOOVER, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

14 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Susan
July 22, 2019
The ice dispenser stopped dispensing crushed ice. The whole ice pieces then backed up in the dispensing hole and a piece of white plastic came out with it. Does that piece help with the crushing and can it be replaced? What is it? Thanks
For model number FGUS2642LF1
PartSelect logo
Hello Susan, thank you for your question. The white plastic piece probably came from the ice bucket itself. We would recommend removing the ice bucket and inspecting it over to find the broken part. Look at the auger, and the front and back round pieces that push the ice. The part that allows for crushed or cubed to be dispensed is PartSelect Number: PS8691994. To fix the issue of the unit only dispensing the whole pieces of ice this part should be replaced. I hope this helps!

10 people found this helpful.

Was this helpful?
Thank you for voting!
Paula
August 12, 2019
Does the dispenser crusher housing come with the little door shown as #13 in the diagram? It does not specifically show it in the product photos and the little door is what broke on my dispenser.
For model number FGHS2655PF5A
PartSelect logo
Hi Paula, thank you for your question. Part 13 is now part of the housing, so you would need this part. Good luck with your repair.

6 people found this helpful.

Was this helpful?
Thank you for voting!
Thomas
August 19, 2019
Frigidaire, side by side, the ice maker auger won't stop running when I close freezer side door unless I press the lock button. What is happening, I'm worried!?
For model number PLHS69EESS2
PartSelect logo
Hello Thomas, Thank you for the question. I suggest checking the micro switches in the dispenser, PartSelect Number PS12724042 to see if one is stuck in the on position and causing the dispenser to try and dispense ice. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Todd
December 19, 2019
Ice cub maker makes too much ice, over filling the ice cub tray, open the freezer door and ice cubs fall onto the floor.
For model number PLHS267ZDB2
PartSelect logo
Good Day Todd. Thank you for your question in regards to your unit (Model Number PLHS267ZDB2). Based on our research you may need to replace one or more of the following parts in order to solve the issue that you are having: 1) Dispenser Crusher Housing (PartSelect Number PS2378689). 2) Ribbon Cable Harness (PartSelect Number PS1526364). 3) Ice Chute Door (PartSelect Number PS1526426). 4) Water Dispenser Control Board (PartSelect Number PS1526494). You can order these parts either online at our website www.PartSelect.ca or by calling us by phone at 877-910-4613. Best Regards.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Doug
August 14, 2019
Do you sell the 1/4" hex head screws labeled #25 and the phillip's screws labeled #26 of your ice container assembly diagram?
For model number 25357113600
PartSelect logo
Hello Doug, Thank you for the question. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Dan
April 11, 2018
Does the flap that the actuator opens come with the ice crusher housing.
For model number DGUS2645LF2
PartSelect logo
Hi Dan, Thank you for your question. The flap you are looking for is sold with the dispenser module. The part number listed under your model number for the dispenser module is PS10060200. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Jeff
February 19, 2019
Hi. When i press for ice, it works, but it's too loud (sort of grindy, squeaky sound). Also, the crushed ice doesn't work any more. When i look carefully at it, the dispenser crusher housing is cracked badly. I'm fine with ordering a new one, but i wonder if my noise problem/no crushed ice is a bigger problem. Should i buy the entire assembly instead of just the crusher housing? Thanks. Jeff
For model number FFHS2622MSN
PartSelect logo
Hello Jeff, Thank you for the question. If the housing is damaged it can cause the blades and internal parts will not be able to operate properly, causing the noise and no crushed ice. Hope this helps, good luck with this repair!

Was this helpful?
Thank you for voting!
Sandy
June 19, 2019
When you press the ice dispenser it keeps building up ice in the bin on the inside of the door and then the ice gets stuck. You have to put your hand up in there to get the ice to come out and then if all comes out and flys everywhere. Will this part fix that
For model number FGHS2631PF4A
PartSelect logo
Hello Sandy, thank you for inquiring. Yes, this replacement Dispenser Crusher Housing for your model may fix the issue. You may also want to consider either the Drive Blade part PS1526405 or the Crushed/Cubed Ice Solenoid Assembly part PS8691994 for your model. We hope this helps.

Was this helpful?
Thank you for voting!
Steve
November 22, 2017
Only makes crushed ice will not dispense whole cubes
For model number FRS26R4AB6
PartSelect logo
Hi Steve, Thank you for your question. I would suggest taking a look at your cubed/crushed ice solenoid. It could be that part is acting up. I have listed that part in a link down below for you. You can test it with a multi meter to see if it is working properly or not. I hope that helps. Good luck with your repair.

Was this helpful?
Thank you for voting!
Related Parts:
Shannon
January 22, 2018
I repaired my icemaker. Put in the part listed. But i don't know if i put the spring on the auger back in the correct position. I don't understand why you don't show a picture of the correct position for the spring, but you don't! You don't show the correct position in the video. There were at least two ways to position it. Now my ice dispenser only dispenses cubes. No crushed ice any more. When i push for crushed ice, i get cubes. Oh well, i guess i'll have to live with it since you won't show the correct position for the spring. Dispenser crusher housing
PartSelect logo
Hi Shannon, Thank you for your question. If you are talking about the spring that goes on the bottom of the bucket near the back, there is only one way for that spring to be installed. You would have to install it horizontally with the screw hole tab facing out. If you go to minute 9:07 in the video, you will see how that part is supposed to be installed. It sounds like your solenoid is constantly activated in the back, because the default setting for ice in your machine is crushed ice. I would suggest just checking to make sure you reinstalled your ice bucket into your freezer correctly. I hope that helps. Good luck with your repair.

Was this helpful?
Thank you for voting!
  • 1
  • 2
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2378689
Manufacturer Part Number: 241885001
Brand
Model Number
Description
Kenmore
25344302400
Refrigerator
Kenmore
25344302401
Refrigerator
Kenmore
25344303400
Refrigerator
Kenmore
25344303401
Refrigerator
Kenmore
25344303402
Refrigerator
Kenmore
25344303403
Refrigerator
Kenmore
25344304400
Refrigerator
Kenmore
25344304401
Refrigerator
Kenmore
25344309400
Refrigerator
Kenmore
25344309401
Refrigerator
Kenmore
25344333600
Refrigerator
Kenmore
25344333601
Refrigerator
Kenmore
25344333602
Refrigerator
Kenmore
25344333603
Refrigerator
Kenmore
25344333604
Refrigerator
Kenmore
25344333605
Refrigerator
Kenmore
25344333606
Refrigerator
Kenmore
25344333607
Refrigerator
Kenmore
25344333608
Refrigerator
Kenmore
25344333609
Refrigerator
Kenmore
2534433360A
Refrigerator
Kenmore
25344352400
Refrigerator
Kenmore
25344352401
Refrigerator
Kenmore
25344352403
Refrigerator
Kenmore
25344352404
Refrigerator
Kenmore
25344352405
Refrigerator
Kenmore
25344352406
Refrigerator
Kenmore
25344352407
Refrigerator
Kenmore
25344352408
Refrigerator
Kenmore
25344352409
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service